Twój koszyk jest pusty.

Koszyk

308 AR HANDGUARD REMOVAL TOOL

050806108554 080000487

Ułatwia, przyspiesza i czyni bezbolesnym demontaż osłony lufy

Praktyczne narzędzie eliminuje potrzebę posiadania drugiej pary rąk podczas demontażu osłon lufy typu AR. Wystarczy włożyć zahaczony koniec narzędzia do gniazda magazynka, umieścić uchwyty nad pierścieniem delta i nacisnąć w dół, aby ścisnąć sprężynę pierścienia delta. Wykonane z mocnej stalowej pręta o średnicy ¼" (6.4mm), pokrytego syntetyczną gumą w celu ochrony broni przed zarysowaniami.

SPECS: Stal, pokryta gumą, kolor czarny. Długość 11” (27.9cm). Pasuje do AR-15, M16A1 & A2 oraz karabinków AR-Style .308 z pierścieniami delta.

Więcej...

Makes Taking The Handguard Off Fast, Easy & Painless

Handy tool eliminates the need for a second pair of hands when removing AR-type handguards. Simply insert the hooked end of the tool into the mag well, position handles over delta ring, and push down to compress the delta ring spring. Made of strong ¼" (6.4mm) steel rod, with synthetic rubber coating to protect gun from surface scratches.

SPECS: Steel, rubber-coated, black. 11” (27.9cm) long. Fits AR-15, M16A1 & A2, and AR-Style .308 rifles with delta rings.

Więcej...

Oceny klientów dla BROWNELLS AR-15/M16 HANDGUARD REMOVAL TOOL

Liczba ocen: 13
Od brownells.com: 13
Średnia ocena: 3

Works fantastic. (13-09-2009)

Makes removing or replacing handguards easy.
Protective coating prevents scratching or damaging finish of firearm. Plenty of surface area making contact with magazine well to distribute stress levels below damage levels. And yes there are some out there on the market that do not have a protective coating and a small contact point that can cause indentation (dents) in your Mag well. Great product!

great!! (15-09-2009)

Makes a world of difference. No more fighting to get the handguards off.

Not all it's cracked up to be (18-11-2009)

After removing the handguard on only one rifle, the coating is broken through at the contact points with the delta ring. Even before this, the coating is not bonded to the wrench underneath and rotates around, losing much of the extra leverage it could otherwise be providing.

I will probably improve mine by removing the existing coating and replacing with an industrial, hot-glued heat shrink insulation.

Worked But Protective Covering Came Off (18-02-2010)

While trying to install some new Troy rails on my Colt M4 I used this tool and the rubberized protective covering on the removal tool ripped and started coming off. I would not recommend this tool until a different rubberized treatment was applied to the tool.

overall good tool (15-03-2010)

Makes the job of removing the handgurds very easy. Very easy on the hands. Rubber protective coating is a bit soft and is heavily scuffed after limited use. It is not torn and no metal is exposed but still reveals a minor lack of quality. Not too hard to upgrade on your own for the price value here though.

coating comes off after a few uses (25-04-2010)

Have only used a few times and the urethane coating has broken and is coming off at all contact points. Great for a single build but not for folks who want to use it for several.

Does What It Needs To (06-08-2010)

I used this tool to remove the factory handguard on my AR carbine. It worked perfectly, without any problems. It is much better than trying to remove a handguard without any tools. Save yourself the hassle and purchase this tool.

Worked good for one use (08-03-2012)

Product works like it is supposed to. Problem is the coating is already crinkled after one use. I would recomend wrapping it in black electrical tape to help sustain the coating.

"Serious Users Need Not Apply" (05-04-2012)

This is almost not worth getting... it is only good for 1 or 2 uses before the coating is worn out. Once the rubber wears away it will scratch up the delta ring and is almost impossible to keep it from slipping.
Case and point: 3rd rifle I tried with this in the first day of use it slipped off a brand new stubborn/tight delta ring and my knuckles suddenly lacked skin from impacting the receiver with the force I was applying to the tool.
For such limited use I would stick to manually removing the handguard by hand.. that being said if your like me and work on multiple AR's a week then you need something beefier. This wont cut it for any long term armorer duty. Save yourself the cash and just buy the stronger model that costs a bit more on here. Night and day difference and that one is actually going strong many rifles later.

Must have tool (13-08-2012)

Very handy tool with new delta ring springs, speeds up hand guard installation.

Damages Gun (20-01-2014)

Used one time and the plastic coating on the tool is so cheap that it it pushed right through to the finiish on the underside of the magazine. Left about 1/2 centimeter gouge out of the gun's black finish. Total junk. Do not buy, look for fully pollymer alternatives or tightly rubberband two tooth brushes together facing away frome one another. Works just and well and wont scratch your weapon.

Don't get this one! (29-11-2015)

First use coating came off, slipped down and marred finish. Horrible. Pay the extra few bucks and get the other one here. You wont be sorry.

priced right, easily improved (30-04-2018)

i originally purchased a significantly more expensive tool for this purpose, and it looked like it had been made by a twelve year old industrial arts student. this thing turns out to be among the least expensive of its type, has symmetrical bends, no sketchy welds, and is sufficiently stout for careful use right out of the box.

a bunch of folks have dumped on this tool for the coating peeling where it contacts the delta ring. to be safe, i found a short section of â"id vinyl tubing, and chopped off a couple of 3" lengths. they slipped right over the dipped coating already on the tool, and the thing functions flawlessly. if the magwell end of the tool ever starts to go, i'll slap some heavy shrink tube on it and it will be fine.

5 minutes of work has made this thing as good as or better than tools that cost twice the price.

Zobacz 13 dodatkowych opinii na brownells.com

194 194 1 PLN

Nr produktu: 080000487
BROWNELLS AR-15/M16 HANDGUARD REMOVAL TOOL 050806108554 Praktyczne narzędzie eliminuje potrzebę posiadania drugiej pary rąk podczas demontażu osłon lufy typu AR. Wystarczy włożyć zahaczony koniec narzędzia do gniazda magazynka, umieścić uchwyty nad pierścieniem delta i nacisnąć w dół, aby ścisnąć sprężynę pierścienia delta. Wykonane z mocnej stalowej pręta o średnicy ¼" (6.4mm), pokrytego syntetyczną gumą w celu ochrony broni przed zarysowaniami.

194 PLN 27 194,00 zł *

Czas dostawy ok. 14-21 dni.
Ponad 10 sztuk w magazynie w USA

Specyfikacja: Make: AR-15

Dodaj do listy zakupów

Zapytaj

Szczegóły

Dodaj do listy zakupów

Zapytaj

Top takeaways

Praktyczne narzędzie do demontażu osłon lufy typu AR bez pomocy drugiej osoby.
Wykonane z mocnej stali pokrytej syntetyczną gumą, aby chronić broń przed zarysowaniami.
Pasuje do AR-15, M16A1 & A2 oraz karabinków AR-Style .308 z pierścieniami delta.

Cechy

Wytwórca: AR-15 Waga dostawy: 0,113kg Wysokość wysyłki: 41mm Szerokość wysyłki: 99mm Długość wysyłki: 292mm

Szczegóły pozycji

Made in USA

🛠️ Praktyczne narzędzie do demontażu osłon lufy AR-15/M16. Wykonane z mocnej stali, pokryte gumą dla ochrony. Idealne dla AR-Style .308. Dowiedz się więcej!

Ułatwia, przyspiesza i czyni bezbolesnym demontaż osłony lufy

SPECS: Stal, pokryta gumą, kolor czarny. Długość 11” (27.9cm). Pasuje do AR-15, M16A1 & A2 oraz karabinków AR-Style .308 z pierścieniami delta.

Więcej...

Makes Taking The Handguard Off Fast, Easy & Painless

SPECS: Steel, rubber-coated, black. 11” (27.9cm) long. Fits AR-15, M16A1 & A2, and AR-Style .308 rifles with delta rings.

Więcej...

Oceny klientów dla BROWNELLS AR-15/M16 HANDGUARD REMOVAL TOOL

Liczba ocen: 13
Od brownells.com: 13
Średnia ocena: 3

Works fantastic. (13-09-2009)

great!! (15-09-2009)

Makes a world of difference. No more fighting to get the handguards off.

Not all it's cracked up to be (18-11-2009)

Worked But Protective Covering Came Off (18-02-2010)

overall good tool (15-03-2010)

coating comes off after a few uses (25-04-2010)

Have only used a few times and the urethane coating has broken and is coming off at all contact points. Great for a single build but not for folks who want to use it for several.

Does What It Needs To (06-08-2010)

Worked good for one use (08-03-2012)

Product works like it is supposed to. Problem is the coating is already crinkled after one use. I would recomend wrapping it in black electrical tape to help sustain the coating.

"Serious Users Need Not Apply" (05-04-2012)

Must have tool (13-08-2012)

Very handy tool with new delta ring springs, speeds up hand guard installation.

Damages Gun (20-01-2014)

Don't get this one! (29-11-2015)

First use coating came off, slipped down and marred finish. Horrible. Pay the extra few bucks and get the other one here. You wont be sorry.

priced right, easily improved (30-04-2018)

Zobacz 13 dodatkowych opinii na brownells.com

BROWNELLS BALLPEEN HAMMER MODEL HP8 8OZ (226.8 GRAMS)
BALLPEEN HAMMER

BROWNELLS

W magazynie

124,00 zł * 124,00 zł - 289,00 zł*

Młotki

Dokładnie zmierz komorę lufy karabinu z miernikiem Field Gauge Forster 223 Remington. Zapewnij bezpieczeństwo i precyzję. 🛠️ Sprawdź teraz!

FORSTER PRODUCTS, INC. 223 REMINGTON FIELD GAUGE
HEADSPACE GAUGES

FORSTER PRODUCTS, INC.

Zamówione ponownie

249,00 zł * 229,00 zł - 259,00 zł*

Sprawdziany odstępu zaporowego | Narzędzia do pomiaru łusek i headspace

3,9

BROWNELLS CURL SCRAPER SET
HARD FIT CURL SCRAPERS

BROWNELLS

Zamówione ponownie

959,00 zł * 179,00 zł - 959,00 zł*

Skrobaki do drewna

BROWNELLS .40/10MM CYLINDER BRASS PILOT
BRASS PILOTS

BROWNELLS

W magazynie

134,00 zł * 39,00 zł - 174,00 zł*

Piloty do narzędzi wygładzających

BROWNELLS NON-MARRING NYLON BENCH BLOCK
GUNSMITH TOTALLY NON-MARRING NYLON BENCH BLOCK

BROWNELLS

W magazynie

174,00 zł *

Uchwyty do ławy warsztatowej

AMERICAN RIFLE COMPANY MAUSINGFIELD RECEIVER WRENCH
MAUSINGFIELD RECEIVER WRENCH

AMERICAN RIFLE COMPANY

W magazynie

589,00 zł *

Klucze

BROWNELLS 1/2"-28 AR-15/M16 FLASH SUPPRESSOR TAP
AR-15/M16 FLASH SUPPRESSOR TAP

BROWNELLS

Zamówione ponownie

139,00 zł * 139,00 zł - 174,00 zł*

Gwintowniki

WHITE DISTRIBUTION #1 MEDIUM, 8/PACK
MILD STEEL WOOL

WHITE DISTRIBUTION

W magazynie

79,00 zł *

Wełna metalowa | Środki do czyszczenia łusek

J P ENTERPRISES AR-15 SPRING KIT
AR-15 REDUCED POWER SPRING KIT

J P ENTERPRISES

W magazynie

114,00 zł *

Sprężyny spustu

4,7

MAGPUL AR-15 PMAG GEN M2 MOE MAG 223/5.56 30RD POLYMER BLACK
AR-15 30RD PMAG GEN M2 MOE MAGAZINE 223/5.56

MAGPUL

W magazynie

104,00 zł * 104,00 zł - 7 799,00 zł*

Magazynki | Magazines

4,8

SLIP 2000 4 OZ. CLEANER/DEGREASER PUMP SPRAY
725 GUN CLEANER DEGREASER

SLIP 2000

W magazynie

114,00 zł * 114,00 zł - 539,00 zł*

Odtłuszczacze

MILITARIA BORELIGHT
BORELIGHT

MILITARIA

Niedostępne

Światła do kontroli przewodu lufy

3,6

DARRELS CUSTOM FIREARMS HANDGUARD TOOL
AR-15/M16 HANDGUARD REMOVAL TOOL

DARRELS CUSTOM FIREARMS

Zamówione ponownie

264,00 zł *

Narzędzia do łoża

Zaloguj się

Nie pamiętasz hasła?
Zarejestruj się

Kontakt

Facebook

Mapa strony

Kategorie produktów

Zamawianie

Obsługa klienta

Witamy!

Witamy w brownells.pl wiodącym dostawcy w Polsce akcesoriów do broni, części broni, narzędzi rusznikarskich, narzędzi do elaboracji amunicji oraz komponentów.

Co oferujemy

Lubisz strzelać, pracujesz przy naprawach broni zawodowo lub hobbystycznie lub po prostu jesteś właścicielem broni, to nasza strona jest właśnie dla Ciebie!

Przez ponad 75 lat strzelcy, rusznikarze, hobbyści, wojskowi, służby specjalne korzystają z usług Brownells jako dostawcy szerokiego asortymentu, wysokiej jakości części broni. Znajdziesz ponad 90 000 produktów w tym części nietypowe, akcesoria, narzędzia rusznikarskie i inne produkty do utrzymania, naprawy i ulepszania swojej broni.