Twój koszyk jest pusty.

Koszyk

Pomoc i kontakt

Darmowa standardowa dostawa powyżej 999 zł

Newsletter

Promocje

Ponad 300 000 klientów - dziękujemy!

4,93/5 "Bardzo dobry" (ponad 1400 recenzji)

Ponad 40 000 produktów do polowania i strzelectwa

BROWNELLS
1" NYLON/BRASS HAMMER

050806023659 818600100

Nasz Najpopularniejszy Rusznikarski Młotek Bez Uszkodzeń

To połączenie jest tak idealne do wielu prac w sklepie z bronią i na strzelnicy, że niemożliwe jest wymienienie ich wszystkich. Nylonowa główka jest odporna na pęknięcia i nie uszkodzi metalu. Solidny mosiądz to podstawa dla rusznikarzy do użytku z przecinakami i wieloma innymi narzędziami.

SPECS: Średnica główki 1" (2.5cm). Rączka z drewna hikorowego o długości 10½" (26.67cm). Waga około 6 oz. (170.1g).

Więcej...

Our Most Popular Gunsmith No-Mar Hammer

This combo is so perfect for so many jobs around the gun shop and on the range, it's impossible to list 'em all. Nylon head resists breaking, won't mar metal. Solid brass is the Basic for gunsmith use with punches and more.

SPECS: 1" (2.5cm) diameter faces. 10½" (26.67cm) hickory handle. Weighs approximately 6 oz. (170.1g).

Więcej...

Oceny klientów dla BROWNELLS 1" NYLON/BRASS HAMMER

Liczba ocen: 10
Od brownells.com: 10
Średnia ocena: 4,6

Works great (10-09-2009)

The little hammer just sits in a rack on my peg board but when needed I have instant access to either a nylon or brass head depending upon the need.

Excellent tool (11-10-2009)

I keep one of these hammers on every bench in the shop. The nylon is perfect when you cannot mar a finish, and the brass works great for when you need a solid hit, but can't deform the part. I have had my original hammer for almost two years, and it is still going strong, all I have done is touched up the nylon side with the disk sander to clean up the edge and keep it looking sharp.

I would buy this product again (14-10-2009)

Very well made,perfect size for most jobs on guns,You get the best of both worlds brass and nylon..

Quality hammer (02-05-2011)

Great balance, perfect weight and size for gun smithing. Its the hammer I reach for the most.

Best Hammer (05-10-2011)

What great purchase. I found this hammer to be perfect for most jobs. Extremely durable and strong.

Great hammer! (21-01-2013)

This hammer is perfect. Well made, the perfect size for gunsmithing, and the head is firmly attached to the handle. This is definitely a keeper.

Good Paperweight (24-08-2013)

First the good side. Its the right size and weight. Now the bad side. The heads do NOT screw flush with the base. The brass head leaves a 1/8" gap with the base. Same with the Nylon head. Also the Nylon head has a Big "O" mark the size of a dime marked on. I am sending this one back to Brownells because as it is it can only be used a paperweight.

Good gunsmithing hammer (05-12-2013)

As a former auto mechanic, I have hammers. I have a lot of hammers. This one is well-suited for working on guns though. The weight is right for the tap-tap that you need every now and then for a sticky pin or dovetail sight. With a nylon side and a brass side, it provides two options for non-marking, smacking power. Put your 32-oz smith hammer down and use this one on your handgun or rifle.

Very nice hammer. Glad I got this tool. (05-02-2014)

It's a very nice tool. I had a small brass hammer and wanted one a little bigger with a plastic head. It fits the bill.

Brownells is tops for gunsmithing tools.

brass and poly...perfect hammer heads (09-02-2015)

I thought I was going to buy an 8oz. ball peen hammer, but found that this hammer is much better. Bronze for non-marring the steel parts of the job (in case you miss a hit), and even doens't mar or wear the head of pin punches as brass is much inferior/softer than steel. The polymer head is good for light smacks for job fitting and ensuring a good mate of parts.

Best of all, the hammer heads are replaceable and could be bought again from Brownells.

Zobacz 10 dodatkowych opinii na brownells.com

199 199 1 PLN

Nr produktu: 818600100
BROWNELLS 1" NYLON/BRASS HAMMER
Numer części: 156001 050806023659 To połączenie jest tak idealne do wielu prac w sklepie z bronią i na strzelnicy, że niemożliwe jest wymienienie ich wszystkich. Nylonowa główka jest odporna na pęknięcia i nie uszkodzi metalu. Solidny mosiądz to podstawa dla rusznikarzy do użytku z przecinakami i wieloma innymi narzędziami.

199 PLN 82 199,00 zł *

Czas dostawy ok. 14-21 dni.
Ponad 10 sztuk w magazynie w USA

Specyfikacja: Size: 1 Style: Brass, Nylon Weight: 6.0 oz

Dodaj do listy zakupów

Zapytaj

Szczegóły

Dodaj do listy zakupów

Zapytaj

Top takeaways

Młotek 1" NYLON/BRASS HAMMER od BROWNELLS jest idealny do wielu prac w sklepie z bronią i na strzelnicy.
Nylonowa główka jest odporna na pęknięcia i nie uszkadza metalu, a solidny mosiądz jest idealny do użytku z przecinakami.
Specyfikacje: średnica główki 1" (2.5 cm), rączka z drewna hikorowego o długości 10½" (26.67 cm), waga około 6 oz. (170.1 g).

Cechy

Rozmiar: 1 Styl: Brass,Nylon Waga lufy: 6.0 oz Waga dostawy: 0,204kg Wysokość wysyłki: 20mm Szerokość wysyłki: 69mm Długość wysyłki: 259mm UPC : 050806023659

Szczegóły pozycji

Made in USA

Odpowiedzialny podmiot gospodarczy zgodnie z rozporządzeniem UE

Brownells Polska Sp. z o.o.
Armii Krajowej 77
05-071 Sulejówek
Polska
info@brownells.pl

Odkryj młotek BROWNELLS 1" z nylonu i mosiądzu! Idealny do prac w sklepie z bronią 🛠️, odporny na pęknięcia i nie uszkadza metalu.

Nasz Najpopularniejszy Rusznikarski Młotek Bez Uszkodzeń

SPECS: Średnica główki 1" (2.5cm). Rączka z drewna hikorowego o długości 10½" (26.67cm). Waga około 6 oz. (170.1g).

Więcej...

Our Most Popular Gunsmith No-Mar Hammer

SPECS: 1" (2.5cm) diameter faces. 10½" (26.67cm) hickory handle. Weighs approximately 6 oz. (170.1g).

Więcej...

Oceny klientów dla BROWNELLS 1" NYLON/BRASS HAMMER

Liczba ocen: 10
Od brownells.com: 10
Średnia ocena: 4,6

Works great (10-09-2009)

The little hammer just sits in a rack on my peg board but when needed I have instant access to either a nylon or brass head depending upon the need.

Excellent tool (11-10-2009)

I would buy this product again (14-10-2009)

Very well made,perfect size for most jobs on guns,You get the best of both worlds brass and nylon..

Quality hammer (02-05-2011)

Great balance, perfect weight and size for gun smithing. Its the hammer I reach for the most.

Best Hammer (05-10-2011)

What great purchase. I found this hammer to be perfect for most jobs. Extremely durable and strong.

Great hammer! (21-01-2013)

This hammer is perfect. Well made, the perfect size for gunsmithing, and the head is firmly attached to the handle. This is definitely a keeper.

Good Paperweight (24-08-2013)

Good gunsmithing hammer (05-12-2013)

Very nice hammer. Glad I got this tool. (05-02-2014)

It's a very nice tool. I had a small brass hammer and wanted one a little bigger with a plastic head. It fits the bill.

Brownells is tops for gunsmithing tools.

brass and poly...perfect hammer heads (09-02-2015)

Zobacz 10 dodatkowych opinii na brownells.com