Promień .220\ Pasuje do konturu ramy Springfield Armory
Promień .220° eliminuje nieestetyczną szczelinę na górnej krawędzi tylnych części ramy pistoletów Springfield Armory. Podniesiony Palmswell zapewnia pewne zwolnienie bezpiecznika niezależnie od stylu chwytu. Zakrzywiony kształt pozwala na niższe ustawienie pistoletu w dłoni, co przekłada się na lepszą kontrolę odrzutu. Dodatkowa szerokość i długi ramie blokujące spust pozwalają na precyzyjne, niemal indywidualne dopasowanie.
SPECS: Stal, wykończenie matowe niebieskie lub ze stali nierdzewnej (s/s). 22mm od tyłu otworu do końca. Dostępne w wersji Standard i Palmswell. Pasuje do serii 70, może być modyfikowane do serii 80. Promień .220° wymaga przeróbki ramy.
Więcej...
.220\ Radius Fits Springfield Armory Frame Contour
.220° radius eliminates the unsightly gap at the top edge of the frame tangs on Springfield Armory guns. Raised palmswell gives positive release with any style grip. Curved shape lets the pistol set lower in your hand for better recoil control. Extra width and a long trigger block arm help you get a precise, custom-looking fit.
SPECS: Steel, matte blue or stainless steel (s/s) finish. .886" (22mm) from rear of hole to tip. Available in Standard and Palmswell. Fits Series 70, can be modified to fit Series 80. .220° radius requires alteration to frame.
Więcej...
Oceny klientów dla SMITH & ALEXANDER .220° GRIP SAFETY, PALMSWELL, BLUE
Liczba ocen: 11
Od brownells.com: 11
Średnia ocena: 4,7
Love it(12-04-2013)
I bought this grip safety and the installation jig. For my Springfield Armory 1911. I used my Dremel tool and a grinding wheel. I have never done anything like this before. I didn't realize the tag inside the package opened to revel instructions till after I finished installing it. I just did what seemed natural and it came out PERFECT! No fitting of the grip safety was needed. Very easy!
Very confortable!(16-02-2010)
This grip safey was fairly easy to install. Some people don't like to hand fit things, but I think it makes for a better fit sometimes! When istalling this part the .220 Jig from S&A is a must! The grip feels alot better than the standard grip safety on my mil-spec. It does give you a higher grip on the frame which helps with accuracy...and thats always good!!!
Very comfortable(11-01-2011)
I chose this part to replace the palmswell version with came with my Springfield loaded. The bump had a tendency to dig into my hand. I was hoping for a drop-in, but that was not the case; I had to dremel the inside slightly to fit it to the frame (I considered modifying the frame to be unacceptable), as well as file the groove for the hammer strut so that it would clear. It was not difficult, but did take patience. I was able to fit it to my pistol in about 1-2 hours, max. In the end it was worth it, the grip is far more comfortable and more aesthetically pleasing now than before. The internal lug which blocks the trigger worked just fine out of the box and needed no modification.
Not only for SA !!(11-09-2010)
Is anyone else old enough to remember Safari Arms ? In the mid 1980's I built an IPSC .45 ACP based on a blue Colt Series 70. I don't think that blue was an option at that time, so I used a Safari Arms SS beavertail grip safety. I recently decided to try make the appearance of that pistol more uniform by going with a blue beavertail. I measured the radius as well as I could and decided to take a chance by ordering it since Brownell's return policy is so great (no questions asked / no hesitation). Well, it worked !! The only adjustment needed was to remove several thousandths from the bottom of the grip safety so that it didn't bind on the S&A Mainspring Housing / Magwell. IT IS PERFECT! Thank you Brownell's.
Perfect fit, following directions(15-03-2012)
Little by little I'm cutomizing my 25 year old Springfield N/M. The last project was to replace the grip safety and mainspring housing. It required the .220 modification to the frame. I worked slowly and followed "on line" directions. It turned out perfect and looks as good as my other factory "semi-custom" pistols.
Great Product, Beautiful Fit(08-05-2012)
Great product. extremely comfortable and my Wilson Combat Ultra Skeletonized hammer is the perfect match for this grip safety. Does require the S & A Installation jig if doing the work yourself (for installs on Springfield 1911-A1 GI Models).
Very nice fitment, great product!(07-12-2013)
Fit nicely to my Springfield 1911-A1. Make sure to get the Smith & Alexander .220 installation jig and the installation will go easy. I used a Dremel with a grinding bit to do most of the work, some light sanding to smooth it out, then applied some Perma Blue. Very happy with this product.
feels great(06-02-2010)
I had one of these installed on my 1911 and she feels great. cant wait to take her to the range!
Easy install(20-05-2010)
I have installed 3 of these with the S&A Jig. makes the shaping and installattion very easy. Minimum trial and error fitting for a great looking job.
Perfect fit for Springfield(24-06-2011)
Very fun to install as ong as you go slow and if you are buying this please GET THE JIG!Great quality part that blends right in perfectly with a Springfield and will leave no cheesy looking gaps,very professional looking when finished!Thank you S&A for keeping the Springfield lovers in mind!Added some pictures below-Springfield GI full size.
Springfields best friend(31-12-2012)
Unfourtunalty there are not to many .220 radius grip safetys for us Springfield lovers. But with a little extra work you can file your own memory groves or checkering. The high ride with a custom blend fits perfect. Even tho choices are limmited at least this choice is well worth it.
Nr produktu: 849009027 SMITH & ALEXANDER .220° GRIP SAFETY, PALMSWELL, BLUE Promień .220° eliminuje nieestetyczną szczelinę na górnej krawędzi tylnych części ramy pistoletów Springfield Armory. Podniesiony Palmswell zapewnia pewne zwolnienie bezpiecznika niezależnie od stylu chwytu. Zakrzywiony kształt pozwala na niższe ustawienie pistoletu w dłoni, co przekłada się na lepszą kontrolę odrzutu. Dodatkowa szerokość i długi ramie blokujące spust pozwalają na precyzyjne, niemal indywidualne dopasowanie.
Promień .220° eliminuje szczelinę na górnej krawędzi ramy pistoletów Springfield Armory, poprawiając estetykę.
Podniesiony Palmswell zapewnia pewne zwolnienie bezpiecznika niezależnie od stylu chwytu, a zakrzywiony kształt poprawia kontrolę odrzutu.
Bezpiecznik wykonany ze stali, dostępny w wykończeniu matowym niebieskim lub ze stali nierdzewnej, pasuje do serii 70 i może być modyfikowany do serii 80.
Cechy
Model:
Government,Officers,Commander
Rodzaj wykończenia:
Blued
Stronność:
Right
Styl:
Grip
Wytwórca:
1911
Waga dostawy: 0,045kgWysokość wysyłki: 10mmSzerokość wysyłki: 107mmDługość wysyłki: 124mm
Szczegóły pozycji
Made in USA
US export classification: 0A501.x
Elementy te są kontrolowane przez rząd USA i dopuszczone do eksportu tylko do kraju docelowego przeznaczenia do wykorzystania przez ostatecznego odbiorcę lub użytkowników końcowych określonych w niniejszym dokumencie. Nie można ich odsprzedawać, przekazywać ani w inny sposób rozdysponowywać do żadnego innego kraju ani do żadnej innej osoby niż upoważniony odbiorca końcowy lub użytkownik końcowy, w oryginalnej postaci lub po włączeniu do innych przedmiotów, bez uprzedniego uzyskanie zgody od rządu USA lub w inny sposób zatwierdzony przez prawo i przepisy USA.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Nr produktu: 849009017 SMITH & ALEXANDER .220° GRIP SAFETY, STANDARD, BLUE Numer części: GS220BLSTDS70 Promień .220° eliminuje nieestetyczną szczelinę na górnej krawędzi tylnych części ramy pistoletów Springfield Armory. Podniesiony Palmswell zapewnia pewne zwolnienie bezpiecznika niezależnie od stylu chwytu. Zakrzywiony kształt pozwala na niższe ustawienie pistoletu w dłoni, co przekłada się na lepszą kontrolę odrzutu. Dodatkowa szerokość i długi ramie blokujące spust pozwalają na precyzyjne, niemal indywidualne dopasowanie.
Nr produktu: 849009117 SMITH & ALEXANDER .220° GRIP SAFETY, STANDARD, S/S Promień .220° eliminuje nieestetyczną szczelinę na górnej krawędzi tylnych części ramy pistoletów Springfield Armory. Podniesiony Palmswell zapewnia pewne zwolnienie bezpiecznika niezależnie od stylu chwytu. Zakrzywiony kształt pozwala na niższe ustawienie pistoletu w dłoni, co przekłada się na lepszą kontrolę odrzutu. Dodatkowa szerokość i długi ramie blokujące spust pozwalają na precyzyjne, niemal indywidualne dopasowanie.
Nr produktu: 849009127 SMITH & ALEXANDER .220° GRIP SAFETY, PALMSWELL, S/S Promień .220° eliminuje nieestetyczną szczelinę na górnej krawędzi tylnych części ramy pistoletów Springfield Armory. Podniesiony Palmswell zapewnia pewne zwolnienie bezpiecznika niezależnie od stylu chwytu. Zakrzywiony kształt pozwala na niższe ustawienie pistoletu w dłoni, co przekłada się na lepszą kontrolę odrzutu. Dodatkowa szerokość i długi ramie blokujące spust pozwalają na precyzyjne, niemal indywidualne dopasowanie.
Promień .220\ Pasuje do konturu ramy Springfield Armory
Promień .220° eliminuje nieestetyczną szczelinę na górnej krawędzi tylnych części ramy pistoletów Springfield Armory. Podniesiony Palmswell zapewnia pewne zwolnienie bezpiecznika niezależnie od stylu chwytu. Zakrzywiony kształt pozwala na niższe ustawienie pistoletu w dłoni, co przekłada się na lepszą kontrolę odrzutu. Dodatkowa szerokość i długi ramie blokujące spust pozwalają na precyzyjne, niemal indywidualne dopasowanie.
SPECS: Stal, wykończenie matowe niebieskie lub ze stali nierdzewnej (s/s). 22mm od tyłu otworu do końca. Dostępne w wersji Standard i Palmswell. Pasuje do serii 70, może być modyfikowane do serii 80. Promień .220° wymaga przeróbki ramy.
Więcej...
.220\ Radius Fits Springfield Armory Frame Contour
.220° radius eliminates the unsightly gap at the top edge of the frame tangs on Springfield Armory guns. Raised palmswell gives positive release with any style grip. Curved shape lets the pistol set lower in your hand for better recoil control. Extra width and a long trigger block arm help you get a precise, custom-looking fit.
SPECS: Steel, matte blue or stainless steel (s/s) finish. .886" (22mm) from rear of hole to tip. Available in Standard and Palmswell. Fits Series 70, can be modified to fit Series 80. .220° radius requires alteration to frame.
Więcej...
Oceny klientów dla SMITH & ALEXANDER .220° GRIP SAFETY, PALMSWELL, BLUE
Liczba ocen: 11
Od brownells.com: 11
Średnia ocena: 4,7
Love it(12-04-2013)
I bought this grip safety and the installation jig. For my Springfield Armory 1911. I used my Dremel tool and a grinding wheel. I have never done anything like this before. I didn't realize the tag inside the package opened to revel instructions till after I finished installing it. I just did what seemed natural and it came out PERFECT! No fitting of the grip safety was needed. Very easy!
Very confortable!(16-02-2010)
This grip safey was fairly easy to install. Some people don't like to hand fit things, but I think it makes for a better fit sometimes! When istalling this part the .220 Jig from S&A is a must! The grip feels alot better than the standard grip safety on my mil-spec. It does give you a higher grip on the frame which helps with accuracy...and thats always good!!!
Very comfortable(11-01-2011)
I chose this part to replace the palmswell version with came with my Springfield loaded. The bump had a tendency to dig into my hand. I was hoping for a drop-in, but that was not the case; I had to dremel the inside slightly to fit it to the frame (I considered modifying the frame to be unacceptable), as well as file the groove for the hammer strut so that it would clear. It was not difficult, but did take patience. I was able to fit it to my pistol in about 1-2 hours, max. In the end it was worth it, the grip is far more comfortable and more aesthetically pleasing now than before. The internal lug which blocks the trigger worked just fine out of the box and needed no modification.
Not only for SA !!(11-09-2010)
Is anyone else old enough to remember Safari Arms ? In the mid 1980's I built an IPSC .45 ACP based on a blue Colt Series 70. I don't think that blue was an option at that time, so I used a Safari Arms SS beavertail grip safety. I recently decided to try make the appearance of that pistol more uniform by going with a blue beavertail. I measured the radius as well as I could and decided to take a chance by ordering it since Brownell's return policy is so great (no questions asked / no hesitation). Well, it worked !! The only adjustment needed was to remove several thousandths from the bottom of the grip safety so that it didn't bind on the S&A Mainspring Housing / Magwell. IT IS PERFECT! Thank you Brownell's.
Perfect fit, following directions(15-03-2012)
Little by little I'm cutomizing my 25 year old Springfield N/M. The last project was to replace the grip safety and mainspring housing. It required the .220 modification to the frame. I worked slowly and followed "on line" directions. It turned out perfect and looks as good as my other factory "semi-custom" pistols.
Great Product, Beautiful Fit(08-05-2012)
Great product. extremely comfortable and my Wilson Combat Ultra Skeletonized hammer is the perfect match for this grip safety. Does require the S & A Installation jig if doing the work yourself (for installs on Springfield 1911-A1 GI Models).
Very nice fitment, great product!(07-12-2013)
Fit nicely to my Springfield 1911-A1. Make sure to get the Smith & Alexander .220 installation jig and the installation will go easy. I used a Dremel with a grinding bit to do most of the work, some light sanding to smooth it out, then applied some Perma Blue. Very happy with this product.
feels great(06-02-2010)
I had one of these installed on my 1911 and she feels great. cant wait to take her to the range!
Easy install(20-05-2010)
I have installed 3 of these with the S&A Jig. makes the shaping and installattion very easy. Minimum trial and error fitting for a great looking job.
Perfect fit for Springfield(24-06-2011)
Very fun to install as ong as you go slow and if you are buying this please GET THE JIG!Great quality part that blends right in perfectly with a Springfield and will leave no cheesy looking gaps,very professional looking when finished!Thank you S&A for keeping the Springfield lovers in mind!Added some pictures below-Springfield GI full size.
Springfields best friend(31-12-2012)
Unfourtunalty there are not to many .220 radius grip safetys for us Springfield lovers. But with a little extra work you can file your own memory groves or checkering. The high ride with a custom blend fits perfect. Even tho choices are limmited at least this choice is well worth it.