Solidne obudowy sprężyny głównej z głębokim szachowaniem zapewniają pewny chwyt pistoletu 1911 Auto w dłoni podczas strzelania.
DANE TECHNICZNE: Stal niebieska lub stal nierdzewna. Długość 2-1/16" (5,23 cm), szerokość .536" (13,6 mm). Szachownica 30 lpi. G/C pasuje do ram Govt. i Commander, OM pasuje do ram o długości Officers ACP.
Więcej...
Fully Checkered, No-Slip Grip
Solid steel mainspring housings with deep checkering keep the 1911 Auto firmly located in the shooting hand.
SPECS: Blued steel or stainless steel. 2-1/16" (5.23cm) long, .536" (13.6mm) wide. 30 lpi checkering. G/C fits Govt. and Commander frames, OM fits Officers ACP length frames.
Więcej...
Oceny klientów dla WILSON COMBAT STAINLESS, FLAT (G/C)
Liczba ocen: 11
Od brownells.com: 11
Średnia ocena: 4,7
Great fit(24-08-2010)
This mainspring housing fit my Caspian frame great. The fit was tight, but needed no filing or stoning to fit. Great fit with the internal parts as well.
Nice Product(25-10-2010)
Used in a "scratch built" government model. Fit very well into my (iffy?) Essex frame. Pin hole location was perfect. Solid rail-to-groove fit into frame with no alteration or movement. Cannot see any flaws in the fine, sharp checkering.
Solid(07-12-2011)
Replaced the plastic in my Colt Commander with this. Fit is really good, and solid construction.
Much better than kimber housing(18-06-2015)
I purchased several items including complete spring kit & other Wilson's combat parts such as bullet proof firing pin, bullet proof sear, SS mainspring housing, bullet proof extractor, bullet proof sear spring, several weight recoil springs.
I don't know the 1911 as well as I do the AR and AK so I sent all of my parts to robar to have them NP3+ which has given me excellent performance so they put all of my parts together and I couldn't ask for a better running 1911.
This housing was dropped into a Springfield Lightweight Champion 1911. No modification was necessary, the fit/finish is great.
Fit my Kimber Pro Carry II Perfectly(03-10-2012)
I received my replacement main spring housing today and put it on my Kimber Pro Carry II.
No fitting needed.
Using the appropriate punch sizes I was able to remove the old one and put the new one on with no trouble.
Bottom line: I would recommend this to a friend.
Does NOT fit Kimber Custom II(07-12-2013)
This is a good quality mainspring housing milled form solid bar stock steel, but it DOES NOT just drop in to a Kimber gun. Item is 1/16 to 1/8 inch too tall to fit under grip safety. Will need to be fitted by a professional gunsmith to mill down to fit on gun.
Great product(22-02-2015)
This is a great product as is to be expected with Wilson Combat, especially their Bullet Proof line. It does however need fitting for my Colt Rail Gun. As another reviewer stated, it is just a hair too long to fit. It should be understood that very few parts are actually drop-in on a 1911 and this is not advertised as such, so no need to drop the rating because of it. The part looks and feels great.
Good part(28-09-2016)
Good part, as all of the Wilson Combat parts that I've used in the past are, BUT, like most parts on a 1911, it is not necessarily "Drop-in", although that is what the packaging states. It took about an hours worth of filing and stoning to get the OAL short enough to not bind on the grip safety. Checkering is clean and fine, finish is a matte blue.
Purcahsed for my Colt O1980 XSE (01-01-2017)
No fitting required for my Colt O1980 XSE dropped right in. Tight fit. Replaced the stock poly housing with straight serrations. This Wilson Combat unit feels and looks way better.
Rock Island armory M-S Series commander(24-03-2018)
I love the look and feel of the part, but unfortunately this item does not fit my commander style 1911.
I have a Rock Island 1911 A1 MS (this is a mid size gun from them) with a 4.25" barrel. The housing goes in nice an tight, but i got about an 1/8" or more of it hanging out the bottom before the pin lines up. I'm afraid to have a gunsmith work on it because if it wont work i cant return it.
Nr produktu: 965092101 WILSON COMBAT STAINLESS, FLAT (G/C) Numer części: 92SF874218002831 Solidne obudowy sprężyny głównej z głębokim szachowaniem zapewniają pewny chwyt pistoletu 1911 Auto w dłoni podczas strzelania.
369PLN2369,00 zł
*
Czas dostawy ok. 14-21 dni. 2 szt. w magazynie w USA
Made in USA
US export classification: 0A501.y.1
Elementy te są kontrolowane przez rząd USA i dopuszczone do eksportu tylko do kraju docelowego przeznaczenia do wykorzystania przez ostatecznego odbiorcę lub użytkowników końcowych określonych w niniejszym dokumencie. Nie można ich odsprzedawać, przekazywać ani w inny sposób rozdysponowywać do żadnego innego kraju ani do żadnej innej osoby niż upoważniony odbiorca końcowy lub użytkownik końcowy, w oryginalnej postaci lub po włączeniu do innych przedmiotów, bez uprzedniego uzyskanie zgody od rządu USA lub w inny sposób zatwierdzony przez prawo i przepisy USA.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Nr produktu: 965092001 WILSON COMBAT BLUE, FLAT (G/C) Numer części: 92BF874218002800 Solidne obudowy sprężyny głównej z głębokim szachowaniem zapewniają pewny chwyt pistoletu 1911 Auto w dłoni podczas strzelania.
369PLN4369,00 zł
*
Czas dostawy ok. 14-21 dni. 4 szt. w magazynie w USA
Nr produktu: 965092003 WILSON COMBAT BLUE, FLAT (OM) Numer części: 92BFO874218002817 Solidne obudowy sprężyny głównej z głębokim szachowaniem zapewniają pewny chwyt pistoletu 1911 Auto w dłoni podczas strzelania.
359PLN2359,00 zł
*
Czas dostawy ok. 14-21 dni. 2 szt. w magazynie w USA
Nr produktu: 965092103 WILSON COMBAT STAINLESS, FLAT (OM) Numer części: 92SFO874218002848 Solidne obudowy sprężyny głównej z głębokim szachowaniem zapewniają pewny chwyt pistoletu 1911 Auto w dłoni podczas strzelania.
379PLN5379,00 zł
*
Czas dostawy ok. 14-21 dni. 5 szt. w magazynie w USA
Solidne obudowy sprężyny głównej z głębokim szachowaniem zapewniają pewny chwyt pistoletu 1911 Auto w dłoni podczas strzelania.
DANE TECHNICZNE: Stal niebieska lub stal nierdzewna. Długość 2-1/16" (5,23 cm), szerokość .536" (13,6 mm). Szachownica 30 lpi. G/C pasuje do ram Govt. i Commander, OM pasuje do ram o długości Officers ACP.
Więcej...
Fully Checkered, No-Slip Grip
Solid steel mainspring housings with deep checkering keep the 1911 Auto firmly located in the shooting hand.
SPECS: Blued steel or stainless steel. 2-1/16" (5.23cm) long, .536" (13.6mm) wide. 30 lpi checkering. G/C fits Govt. and Commander frames, OM fits Officers ACP length frames.
Więcej...
Oceny klientów dla WILSON COMBAT STAINLESS, FLAT (G/C)
Liczba ocen: 11
Od brownells.com: 11
Średnia ocena: 4,7
Great fit(24-08-2010)
This mainspring housing fit my Caspian frame great. The fit was tight, but needed no filing or stoning to fit. Great fit with the internal parts as well.
Nice Product(25-10-2010)
Used in a "scratch built" government model. Fit very well into my (iffy?) Essex frame. Pin hole location was perfect. Solid rail-to-groove fit into frame with no alteration or movement. Cannot see any flaws in the fine, sharp checkering.
Solid(07-12-2011)
Replaced the plastic in my Colt Commander with this. Fit is really good, and solid construction.
Much better than kimber housing(18-06-2015)
I purchased several items including complete spring kit & other Wilson's combat parts such as bullet proof firing pin, bullet proof sear, SS mainspring housing, bullet proof extractor, bullet proof sear spring, several weight recoil springs.
I don't know the 1911 as well as I do the AR and AK so I sent all of my parts to robar to have them NP3+ which has given me excellent performance so they put all of my parts together and I couldn't ask for a better running 1911.
This housing was dropped into a Springfield Lightweight Champion 1911. No modification was necessary, the fit/finish is great.
Fit my Kimber Pro Carry II Perfectly(03-10-2012)
I received my replacement main spring housing today and put it on my Kimber Pro Carry II.
No fitting needed.
Using the appropriate punch sizes I was able to remove the old one and put the new one on with no trouble.
Bottom line: I would recommend this to a friend.
Does NOT fit Kimber Custom II(07-12-2013)
This is a good quality mainspring housing milled form solid bar stock steel, but it DOES NOT just drop in to a Kimber gun. Item is 1/16 to 1/8 inch too tall to fit under grip safety. Will need to be fitted by a professional gunsmith to mill down to fit on gun.
Great product(22-02-2015)
This is a great product as is to be expected with Wilson Combat, especially their Bullet Proof line. It does however need fitting for my Colt Rail Gun. As another reviewer stated, it is just a hair too long to fit. It should be understood that very few parts are actually drop-in on a 1911 and this is not advertised as such, so no need to drop the rating because of it. The part looks and feels great.
Good part(28-09-2016)
Good part, as all of the Wilson Combat parts that I've used in the past are, BUT, like most parts on a 1911, it is not necessarily "Drop-in", although that is what the packaging states. It took about an hours worth of filing and stoning to get the OAL short enough to not bind on the grip safety. Checkering is clean and fine, finish is a matte blue.
Purcahsed for my Colt O1980 XSE (01-01-2017)
No fitting required for my Colt O1980 XSE dropped right in. Tight fit. Replaced the stock poly housing with straight serrations. This Wilson Combat unit feels and looks way better.
Rock Island armory M-S Series commander(24-03-2018)
I love the look and feel of the part, but unfortunately this item does not fit my commander style 1911.
I have a Rock Island 1911 A1 MS (this is a mid size gun from them) with a 4.25" barrel. The housing goes in nice an tight, but i got about an 1/8" or more of it hanging out the bottom before the pin lines up. I'm afraid to have a gunsmith work on it because if it wont work i cant return it.