Twój koszyk jest pusty.

Koszyk

VIPER BENCH REST
BARREL VISE

700358214011 100013367

Imadło do luf Viper Barrel Vise jest wykonane z aluminium 6061. Dolna część ma grubość 1”, co zapewnia dodatkową wytrzymałość podczas montażu do stołu warsztatowego. Wszystkie cztery hartowane, gwintowane śruby są wspierane przez sprężyny. Sprężyny te zapobiegają przemieszczaniu się górnej części podczas wkładania i wyjmowania lufy. Każda sprężyna jest stabilnie zamocowana na obu końcach.

SPECYFIKACJE: Podstawa ma wymiary 7" x 3" z rozstawem otworów montażowych 5 3/4" c-t-c; górna płyta ma wymiary 3" kwadrat; cztery śruby 1/2" do zaciskania; pasuje do luf o średnicy od 0.750" do 1".

Więcej...

The Viper Barrel Vise is constructed of 6061 aluminum. The bottom half is 1” thick, for added strength, when mounting to your work bench. All four hardened, threaded bolts have a support spring. These springs keep the top half from moving around during barrel insertion and removal. Each spring is fully captured on each end for stability.

SPECS: Base is 7" x 3" with 5 3/4" c-t-c hole spacing for mounting; top plate is 3" square; four 1/2" bolts for clamping; and will accommodate 0.750" to 1" OD barrels.

Więcej...

Oceny klientów dla VIPER BENCH REST BARREL VISE

Liczba ocen: 11
Od brownells.com: 11
Średnia ocena: 5

Great product (13-12-2014)

I have two of these one in the shop and one on a trailer hitch just in case it is needed at the range. Rugged powder coated finish.

Strong and heavy (29-12-2014)

This barrel vise is built strong and heavy. I used it to install a new barrel on a Rem 700 action. The barrel had a taper and I was worried about "shimming" the new barrel in the vise. I didn't have to. The way it is built with the springs and the over-sized holes, it conformed to the taper of the barrel with no problem. I had freshly parkerized the barrel so I wrapped it with a thick piece of paper from a charcoal bag, although, with the soft powder coat that is on this vise, it probably wasn't necessary. I tend to overdo my projects and this is my kind of tool. It is extremely strong and very heavy. Did I mention that it is strong and heavy?

TOP SHELF VICE (30-01-2015)

Bought this after looking at about a dozen vices. Price was no object but I didn't want to use wooden blocks like some other vices recommended. This is a very well made piece of equipment. I have multiple benchrest rifles and dozens of barrels and I wanted a vice that was easy to use, portable, and I wanted a vice that would not mar my barrels. I couldn't be happier with it.

Vipr Vise Review (16-02-2015)

I bought this vise on a lark so to speak as it was 60 bucks, but looked well built for the money. After receiving it I realized it and was more for the shooter who has a custom rifle and removes his barrel on a regular basis. I, on the other hand, work primarily on older military rifles so I had doubts this vise would remove an older milsurp barrel. I decided to try this vise removing a 30-40 Krag barrel off an old 1898 Springfield. I stripped the rifle down and had the barrel off in less than 30 mins!! No fooling around with vise bushings and stuff, just installed the receiver/barrel in the vise tightened the nuts. First attempt the barrel just slightly turned so I thought OK give it some more. I tightened the vise nuts some more and "viola" the receiver came off like a charm. Hopefully it will work the same when I install the new barrel. For right now I am impressed with this $60.00 vise. I didn't have to use any rosin as the powder coating seemed to grip the barrel well enough on its own. Great item for the money....so far.

Rick H.

Used to build a Mauser sporter... (03-09-2015)

Had a Yugo K98 I needed rebarreling. I got one of the cheap 30-06 Brownell's large ring barrels and went to town. My biggest mistake was buying the pull-through reamer from a competitor. It doesn't seem as good as the one's Brownell's sells. Recommend mounting this a bit off the bench (not directly on) to have clearance for pull through reamer handle or whatever.

No scuffs or marks on barrel. Great product. Manufacturer says not to put anything between barrel and vise... Powder coating is enough.

Excellent Barrel Vise (06-07-2016)

I have only used the vise three times so far, but it has worked flawlessly every time. The vise did not twist or marr the finish on any of the barrels. I could not find any recommendations on how many ft. lbs. of torque to put on the nuts of the vise, so I started at 45 ft lbs and that was all it took. I probably could have gone down to 35 ft lbs, but 45 worked so I am sticking with it. One of the guns I was working on was an Ruger Precision Rifle. I read that the barrel nuts could be tough to release, but with this vise it was no problem.

Excellent (31-12-2016)

Used this to remove a barrel on a late model stainless 700 action. Ran the nuts down with a Dewalt then finished with a box wrench on a straighter section of the barrel. I had no slipping problems once I realized I should tighten it way up. I'm now using it all the time for rifle work just to have a stable platform. Working an action out of the stock was always a pain.

Fabulous (13-06-2017)

Right tool for the right job. I used the BV to remove the barrel nut on a Ruger Precision .308, The BV held the barrel in place with no marring, the barrel nut "hard nut to crack, so they say" came off with ease. The stock barrel was replaces with a carbon fiber barrel with no marring during the torquing process. I am totally delighted with the BV.

Great ,Great,Great Vise for the Money! (19-02-2018)

I Dont bother mounting this Vise to my Bench I mount it in one of my Vises mounted to my bench that way if I'm not mounting a barrel its out of the way, also it has never failed me on any barrel removal job its a strong vise once that barrels mounted in it its not going anywhere but on or off that reciever ,I have not found a barrel yet I could not use it on do yourself a favor and toss all the barrel vises with inserts etc or ones that will only take certain barrels off junk them and buy this one for 60 bucks it takes them all off.

It Just Works!!! (03-09-2018)

I needed a barrel vise to install a new Seekins handguard on my Ruger Precision rifle. After looking at several, I settled on this one based on all the reviews and I'm glad I did. Made of steel and iron, it should last a long time. Held the barrel solid as a rock . I was a bit concerned about damaging the finish on the barrel so I wrapped it in a piece of chamois cloth I had laying around and it still held solid. Torqued the bolts to 30 ft lbs and went to work. The red block will jam up on the bolts if you don't loosen the nuts evenly but other than that, it worked like a charm. Love it to pieces!!!

Brilliant design (30-09-2018)

With just some pieces of cardboard box cutouts to prevent scratches, this thing holds on to the barrel like there's no tomorrow.

You don't even need a workbench. I bought two set of 5" long 1/2" nuts, bolts, and washers, and mounted it directly onto a piece of 4x4 lumber.

Using a breaker bar while either standing or sitting on the 4x4, I could remove the most stubbornly installed muzzle brake with ease.

No need for bushings or any of that nonsense, either.

Zobacz 11 dodatkowych opinii na brownells.com

559 559 1 PLN

Nr produktu: 100013367
VIPER BENCH REST BARREL VISE
Numer części: BV 700358214011 Imadło do luf Viper Barrel Vise jest wykonane z aluminium 6061. Dolna część ma grubość 1”, co zapewnia dodatkową wytrzymałość podczas montażu do stołu warsztatowego. Wszystkie cztery hartowane, gwintowane śruby są wspierane przez sprężyny. Sprężyny te zapobiegają przemieszczaniu się górnej części podczas wkładania i wyjmowania lufy. Każda sprężyna jest stabilnie zamocowana na obu końcach.

559 PLN 86 559,00 zł *

Czas dostawy ok. 14-21 dni.
Ponad 10 sztuk w magazynie w USA

Specyfikacja: Material: Aluminum

Dodaj do listy zakupów

Zapytaj

Szczegóły

Dodaj do listy zakupów

Zapytaj

Top takeaways

Imadło do luf Viper Barrel Vise wykonane jest z aluminium 6061, co zapewnia wytrzymałość i trwałość.
Dolna część o grubości 1” oraz cztery hartowane, gwintowane śruby wspierane przez sprężyny zapewniają stabilność podczas montażu i demontażu lufy.
Specyfikacje: podstawa 7" x 3", rozstaw otworów montażowych 5 3/4" c-t-c, górna płyta 3" kwadrat, cztery śruby 1/2", pasuje do luf o średnicy od 0.750" do 1".

Cechy

Materiał: Aluminum Waga dostawy: 1,52kg Wysokość wysyłki: 106mm Szerokość wysyłki: 112mm Długość wysyłki: 220mm

Szczegóły pozycji

Made in USA

Imadło do luf Viper Barrel Vise z aluminium 6061. Stabilne i wytrzymałe dzięki sprężynom i hartowanym śrubom. Idealne do warsztatu. 🛠️ Dowiedz się więcej!

Więcej...

SPECS: Base is 7" x 3" with 5 3/4" c-t-c hole spacing for mounting; top plate is 3" square; four 1/2" bolts for clamping; and will accommodate 0.750" to 1" OD barrels.

Więcej...

Oceny klientów dla VIPER BENCH REST BARREL VISE

Liczba ocen: 11
Od brownells.com: 11
Średnia ocena: 5

Great product (13-12-2014)

I have two of these one in the shop and one on a trailer hitch just in case it is needed at the range. Rugged powder coated finish.

Strong and heavy (29-12-2014)

TOP SHELF VICE (30-01-2015)

Vipr Vise Review (16-02-2015)

Used to build a Mauser sporter... (03-09-2015)

Excellent Barrel Vise (06-07-2016)

Excellent (31-12-2016)

Fabulous (13-06-2017)

Great ,Great,Great Vise for the Money! (19-02-2018)

It Just Works!!! (03-09-2018)

Brilliant design (30-09-2018)

Zobacz 11 dodatkowych opinii na brownells.com

Sugerowane pozycje
Klienci kupili także

BROWNELLS 1911 BARREL LOCKING LUG FILE #2 CUT
1911 BARREL LOCKING LUG FILE

BROWNELLS

W magazynie

439,00 zł *

Narzędzia do brody lufy

REIFF & NESTOR COMPANY 8-40 BOTTOM THREE-FLUTE TAP
"PERFECT CUT" PREMIUM TAP

REIFF & NESTOR COMPANY

W magazynie

144,00 zł * 79,00 zł - 239,00 zł*

Gwintowniki

BROWNELLS GUNSMITH'S PREMIUM SQUARE CERAMIC STONE
GUNSMITH'S PREMIUM CERAMIC STONE FILE SET

BROWNELLS

Zamówione ponownie

169,00 zł * 134,00 zł - 359,00 zł*

Kamienie

DOUGLAS .30 1-10 TWIST SS #4 CONTOUR ULTRA RIFLED BARREL
CONTOUR #4

DOUGLAS

Zamówione ponownie

2 169,00 zł * 1 779,00 zł - 2 459,00 zł*

Surówki luf

KART PRECISION BARREL XACT FIT TOOL KIT
XACT FIT TOOL KIT

KART PRECISION BARREL

W magazynie

349,00 zł *

Narzędzia do dopasowywania luf

BROWNELLS 0.195" 1911 LUG CUTTER
1911 LUG CUTTER

BROWNELLS

W magazynie

399,00 zł *

Narzędzia do brody lufy

CLYMER 22 LONG RIFLE HEADSPACE GAUGE KIT
GO/NO-GO GAUGE SETS

CLYMER

W magazynie

499,00 zł * 469,00 zł - 669,00 zł*

Sprawdziany odstępu zaporowego

4,9

SHORT ACTION CUSTOMS MODULAR ACTION WRENCH BODY
MODULAR ACTION WRENCH BODY

SHORT ACTION CUSTOMS

W magazynie

969,00 zł *

Klucze

SHORT ACTION CUSTOMS MODEL 1 WRENCH HEAD - REMINGTON 700
MODULAR ACTION WRENCH

SHORT ACTION CUSTOMS

Zamówione ponownie

409,00 zł * 394,00 zł - 409,00 zł*

Klucze

BROWNELLS 2 OZ. J-B BORE CLEANING COMPOUND
J-B® NON-EMBEDDING BORE CLEANING COMPOUND

BROWNELLS

W magazynie

109,00 zł * 59,00 zł - 1 009,00 zł*

Pasty do czyszczenia luf

4,9

🔧 Klucz dynamometryczny do DPMS & KAC .308! Precyzyjne narzędzie do montażu lufy z 24 zębami. Pasuje do DPMS, R-25. Wykonany z wysokiej jakości stali. Dowiedz się więcej!

PRECISION REFLEX DPMS/KAC 308 BARREL NUT WRENCH
DPMS/KAC 308 BARREL NUT WRENCH

PRECISION REFLEX

W magazynie

234,00 zł *

Klucze

3,8

Zaloguj się

Nie pamiętasz hasła?
Zarejestruj się

Kontakt

Facebook

Mapa strony

Kategorie produktów

Zamawianie

Obsługa klienta

Witamy!

Witamy w brownells.pl wiodącym dostawcy w Polsce akcesoriów do broni, części broni, narzędzi rusznikarskich, narzędzi do elaboracji amunicji oraz komponentów.

Co oferujemy

Lubisz strzelać, pracujesz przy naprawach broni zawodowo lub hobbystycznie lub po prostu jesteś właścicielem broni, to nasza strona jest właśnie dla Ciebie!

Przez ponad 75 lat strzelcy, rusznikarze, hobbyści, wojskowi, służby specjalne korzystają z usług Brownells jako dostawcy szerokiego asortymentu, wysokiej jakości części broni. Znajdziesz ponad 90 000 produktów w tym części nietypowe, akcesoria, narzędzia rusznikarskie i inne produkty do utrzymania, naprawy i ulepszania swojej broni.

Ceny zawierają VAT, bez kosztu wysyłki

Widok klasyczny

Widok mobilny