Twój koszyk jest pusty.

Koszyk

Pomoc i kontakt

Darmowa standardowa dostawa powyżej 999 zł

Newsletter

Promocje

Ponad 300 000 klientów - dziękujemy!

4,93/5 "Bardzo dobry" (ponad 1400 recenzji)

Ponad 40 000 produktów do polowania i strzelectwa

BROWNELLS
CAN'T MAR™ 1911 AUTO BUSHING WRENCH

050806102200 080045045

Nie uszkadza wykończenia - Praktycznie niezniszczalny - Kieszonkowy - Wszechstronny, dwustronny design

Każdy właściciel pistoletu 1911 oraz sklep z bronią potrzebuje klucza do demontażu tulei lufy z pistoletów 1911. Nasz pasuje do wszystkich kalibrów i wersji; wykonane przez Colt (w tym fabryczne Officers ACP), a także kopie. Wykonany z super wytrzymałego polimeru ABS klasy "T", klucz Brownells Can't Mar™ jest grubszy i cięższy niż inne syntetyczne klucze. Pozwala na wyjęcie nawet najbardziej dopasowanych, turniejowych tulei bez rysowania lub uszkadzania wykończenia tulei lub zamka pistoletu. Praktycznie niezniszczalny, klucz Can't Mar™ łatwo mieści się w kieszeni lub zestawie w terenie.

DANE TECHNICZNE: Długość 5½" (14,0 cm). Szerokość 1¼" (3,2 cm). Grubość .187" (4,75 mm). Waga 1 uncja (28,3 g).

Więcej...

Can't Damage Finishes-Virtually Unbreakable- Pocket Sized-Versatile, Double-Ended Design

Every 1911 owner and gun shop needs a wrench to remove the barrel bushing from the 1911 Autos. Ours fits all the calibers and variations; Colt-made (including factory Officers ACP), plus copies. Made from super tough ABS "T" grade polymers, Brownells Can't Mar™ wrench has more thickness and heft than other synthetic wrenches. It gets out even the most tightly fitted, match-grade bushing WITHOUT scarring or marring the finish of the gun's bushing or slide. Virtually unbreakable, the Can't Mar™ wrench carries easily in pocket or field kit.

SPECS: 5½" (14.0cm) long. 1¼" (3.2cm) wide. .187" (4.75mm) thick. Weighs 1 oz. (28.3gm).

Więcej...

Oceny klientów dla BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH

Liczba ocen: 14
Od brownells.com: 14
Średnia ocena: 3

Worked once....almost (22-08-2009)

I bought one of these for my Colt Officers ACP. The wrench plastic just deformed on the first use, didn't remove the bushing, and was useless from then on. The bushing is fairly snug on my .45 so maybe that's why it didn't work. Good idea but did not work for me. A waste of my [$] and not worth the cost of returning.

Disappointed.... (14-10-2009)

It worked splendidly a handful of times. After a couple of uses it starts to get seriously chewed up and malformed, leaving bits of orange plastic all down in the guide rod area of the gun. After about 10 uses it was so chewed up it would not successfully break down the gun.

Good tool at a fair price (01-11-2009)

I like this plastic tool better than the Brownells steel Colt wrench because it is light and scratch proof. It does mar slightly because it is plastic. Unless you have super tight bushings, it works perfectly. If you have super tight bushings, you may need the aluminum bushing wrench.

Works Great, Will Not Damage Gun (24-04-2010)

Works great, will not mar finish and holds up Great. have used one in my shop for years and have taken down 100's of 1911's with it, from time to time I have run across a gun with a spring cap, bushing or a slide that has a bur and it can leave a mark on it but that is not the fault of the tool. and if the tool where to brake they are so inexpensive that I would not hesitate to purchase a replacement.

Great Finish Saver (16-08-2010)

This bushing wrench is a real finish saver.. after struggling with an SA Pro bushing, can't imagine what damage may have resulted without it. Although it does shed a little plastic and seems somewhat consumable.. it's well worth every penny compared to refinishing.

It works but has limits (10-10-2010)

The good thing about this plastic wrench is that it doesn't mar the finish, and of course, you probably won't misplace it.

If you have a tight, accurized bushing, as I do, it won't last more than a few times before it gets chewed up. But for the price, buy a few of them.

Doesn't mar your pistols. (09-04-2011)

This tool does what it says but is a little on the soft side for tight bushings. I tore mine up pretty good when fitting a Wilson Combat bushing into my wife's Colt Officers model 1911. The wilson bushing is very tight fitting(good, good,good) after fitting for accuracy. I've recently up graded to the aluminum version.

Good Bushing Wrench and will not damage! (26-03-2012)

It is a very good Bushing Wrench, as it will not mark up your 1911. I would strongly reccomend the purchasing of a few of them for working on or cleaning your 1911.

Save your money, do not buy this wrench (06-09-2012)

I purchased 2 wrenches but found the tolerances are sloppy for a standard 1911 A1 recoil bushing. Trying to make it fit caused the wrench to slip and the recoil spring plug to go flying off the workbench. Cost to replace the plug plus freight about $16. Recommend to step up to the metal wrench.

Good For The Price (06-05-2013)

Does what it says and doesn't mar the finish on the gun. Only drawback is the plastic is a bit on the soft side so it wears out pretty quick. Works great but wish it would last a bit longer.

Great tool (06-07-2013)

Fits both style of bushings. Can easily be reshaped for a custom bushing. Light weight, Strong. Mine has lasted for years. buying a new one cause the old one is among the missing!!!!

Too soft of material (13-09-2014)

Wears out very fast if you have a tight fitting bushing, this won't last long at all. Material is very soft and won't mar the gun but won't last long at all. On the first use, lots of mat'l chipped away from the tool. I imagine after about three uses it would be junk.

Also, so soft that it flexes so much that you can hardly hold the spring plug down enough to turn the bushing enough to lock back in place but it doesn't scratch your weapon at all.

I have now got the brownells enhanced bushing wrench with the flange that retains the recoil spring plug as you twist the bushing free, Great tool and won't scratch your weapon as it is made of aluminum. Well worth the extra money, remember you get what you pay for.

Should have gotten one sooner (06-09-2016)

Great piece of gear to use so as to not scratch up the end of the slide

Doesn't fit (10-12-2017)

The openings are too small (short) to fit my Springfield Armory Inc. target model. Also, to material is too soft, it peels off if I force it onto the bushing. Not worth the money.

Zobacz 14 dodatkowych opinii na brownells.com

79 79 1 PLN

Nr produktu: 080045045
BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH
Numer części: 080045045 050806102200 Każdy właściciel pistoletu 1911 oraz sklep z bronią potrzebuje klucza do demontażu tulei lufy z pistoletów 1911. Nasz pasuje do wszystkich kalibrów i wersji; wykonane przez Colt (w tym fabryczne Officers ACP), a także kopie. Wykonany z super wytrzymałego polimeru ABS klasy "T", klucz Brownells Can't Mar™ jest grubszy i cięższy niż inne syntetyczne klucze. Pozwala na wyjęcie nawet najbardziej dopasowanych, turniejowych tulei bez rysowania lub uszkadzania wykończenia tulei lub zamka pistoletu. Praktycznie niezniszczalny, klucz Can't Mar™ łatwo mieści się w kieszeni lub zestawie w terenie.

79 PLN 484 79,00 zł *

Czas dostawy ok. 14-21 dni.
Ponad 10 sztuk w magazynie w USA

Specyfikacja: Make: 1911 Model: Government, Commander, Officers

Dodaj do listy zakupów

Zapytaj

Szczegóły

Dodaj do listy zakupów

Zapytaj

Top takeaways

Klucz do demontażu tulei lufy z pistoletów 1911 pasuje do wszystkich kalibrów i wersji, wykonany z super wytrzymałego polimeru ABS klasy "T".
Brownells Can't Mar™ jest grubszy i cięższy niż inne syntetyczne klucze, co pozwala na wyjęcie nawet najbardziej dopasowanych tulei bez rysowania lub uszkadzania wykończenia.
Praktycznie niezniszczalny, łatwo mieści się w kieszeni lub zestawie w terenie.

Cechy

Model: Government,Commander,Officers Wytwórca: 1911 Waga dostawy: 0,023kg Wysokość wysyłki: 13mm Szerokość wysyłki: 79mm Długość wysyłki: 150mm UPC : 050806102200

Szczegóły pozycji

Made in USA

Odpowiedzialny podmiot gospodarczy zgodnie z rozporządzeniem UE

Brownells Polska Sp. z o.o.
Armii Krajowej 77
05-071 Sulejówek
Polska
info@brownells.pl

Klucz Brownells Can't Mar™ do pistoletu 1911 jest idealny do demontażu tulei. 💪 Wytrzymały, kompaktowy i bezpieczny dla wykończenia.

Nie uszkadza wykończenia - Praktycznie niezniszczalny - Kieszonkowy - Wszechstronny, dwustronny design

DANE TECHNICZNE: Długość 5½" (14,0 cm). Szerokość 1¼" (3,2 cm). Grubość .187" (4,75 mm). Waga 1 uncja (28,3 g).

Więcej...

Can't Damage Finishes-Virtually Unbreakable- Pocket Sized-Versatile, Double-Ended Design

SPECS: 5½" (14.0cm) long. 1¼" (3.2cm) wide. .187" (4.75mm) thick. Weighs 1 oz. (28.3gm).

Więcej...

Oceny klientów dla BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH

Liczba ocen: 14
Od brownells.com: 14
Średnia ocena: 3

Worked once....almost (22-08-2009)

Disappointed.... (14-10-2009)

Good tool at a fair price (01-11-2009)

Works Great, Will Not Damage Gun (24-04-2010)

Great Finish Saver (16-08-2010)

It works but has limits (10-10-2010)

Doesn't mar your pistols. (09-04-2011)

Good Bushing Wrench and will not damage! (26-03-2012)

It is a very good Bushing Wrench, as it will not mark up your 1911. I would strongly reccomend the purchasing of a few of them for working on or cleaning your 1911.

Save your money, do not buy this wrench (06-09-2012)

Good For The Price (06-05-2013)

Does what it says and doesn't mar the finish on the gun. Only drawback is the plastic is a bit on the soft side so it wears out pretty quick. Works great but wish it would last a bit longer.

Great tool (06-07-2013)

Fits both style of bushings. Can easily be reshaped for a custom bushing. Light weight, Strong. Mine has lasted for years. buying a new one cause the old one is among the missing!!!!

Too soft of material (13-09-2014)

Should have gotten one sooner (06-09-2016)

Great piece of gear to use so as to not scratch up the end of the slide

Doesn't fit (10-12-2017)

The openings are too small (short) to fit my Springfield Armory Inc. target model. Also, to material is too soft, it peels off if I force it onto the bushing. Not worth the money.

Zobacz 14 dodatkowych opinii na brownells.com