Matryca do zwijania stożkowego Lee jest wykonana ze stali hartowanej, zaprojektowana tak, aby pokonać problemy z zaciskaniem spowodowane złym projektem matrycy. Pociski z płaszczem muszą posiadać rowek do zaciskania.
Więcej...
The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Więcej...
Oceny klientów dla LEE PRECISION LEE TAPER CRIMP DIE, 38 SPECIAL
Liczba ocen: 1
Od brownells.com: 1
Średnia ocena: 5
Works well at about half the price(11-04-2014)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!
Nr produktu: 100053274 LEE PRECISION LEE TAPER CRIMP DIE, 38 SPECIAL Numer części: 90781734307907815 Matryca do zwijania stożkowego Lee jest wykonana ze stali hartowanej, zaprojektowana tak, aby pokonać problemy z zaciskaniem spowodowane złym projektem matrycy. Pociski z płaszczem muszą posiadać rowek do zaciskania.
99PLN099,00 zł
*
Zaległe, czas dostawy ok. 4-12 tygodnie z magazynu w USA.
Nr produktu: 100053275 LEE PRECISION LEE TAPER CRIMP DIE, 40 S&W/ 10MM Numer części: 90782734307907822 Matryca do zwijania stożkowego Lee jest wykonana ze stali hartowanej, zaprojektowana tak, aby pokonać problemy z zaciskaniem spowodowane złym projektem matrycy. Pociski z płaszczem muszą posiadać rowek do zaciskania.
99PLN199,00 zł
*
Czas dostawy ok. 14-21 dni. 1 szt. w magazynie w USA
Specyfikacja:Cartridge: 10 mm Auto, 40 S&WDie Style: Taper Crimp Dies
Nr produktu: 100053278 LEE PRECISION LEE TAPER CRIMP DIE, 45 ACP Numer części: 90785734307907853 Matryca do zwijania stożkowego Lee jest wykonana ze stali hartowanej, zaprojektowana tak, aby pokonać problemy z zaciskaniem spowodowane złym projektem matrycy. Pociski z płaszczem muszą posiadać rowek do zaciskania.
94PLN294,00 zł
*
Czas dostawy ok. 14-21 dni. 2 szt. w magazynie w USA
Specyfikacja:Cartridge: 45 Auto (ACP)Die Style: Taper Crimp Dies
Nr produktu: 100053279 LEE PRECISION LEE TAPER CRIMP DIE, 9MM Numer części: 90780734307907808 Matryca do zwijania stożkowego Lee jest wykonana ze stali hartowanej, zaprojektowana tak, aby pokonać problemy z zaciskaniem spowodowane złym projektem matrycy. Pociski z płaszczem muszą posiadać rowek do zaciskania.
89PLN089,00 zł
*
Zaległe, czas dostawy ok. 4-12 tygodnie z magazynu w USA.
Specyfikacja:Cartridge: 9 mm LugerDie Style: Taper Crimp Dies
Matryca do zwijania stożkowego Lee jest wykonana ze stali hartowanej, zaprojektowana tak, aby pokonać problemy z zaciskaniem spowodowane złym projektem matrycy. Pociski z płaszczem muszą posiadać rowek do zaciskania.
Więcej...
The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Więcej...
Oceny klientów dla LEE PRECISION LEE TAPER CRIMP DIE, 38 SPECIAL
Liczba ocen: 1
Od brownells.com: 1
Średnia ocena: 5
Works well at about half the price(11-04-2014)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!