Po prostu usuń tylną muszkę z broni i zastąp ją naszym montażem, aby zamontować swój celownik Vortex Razor, C-More RTS lub STS. Nie są wymagane żadne modyfikacje. Możesz zdjąć nasz montaż i ponownie zamontować tylną muszkę w dowolnym momencie. W zestawie znajduje się osprzęt montażowy. Instrukcje instalacji Usuń tylną muszkę Zainstaluj montaż EGW w rowku Dokręć śrubę blokującą (jeśli dotyczy) Umieść celownik na montażu EGW (umieszczenie małego kawałka papieru pomiędzy celownikiem a montażem ułatwi demontaż i ochroni celownik przed Loctite.) Nałóż niebieski Loctite na dostarczone śruby montażowe Dokręć śruby montażowe do 15 in/lbs Śruby dołączone do tego montażu wymagają klucza imbusowego 5/64'' do instalacji.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.