Twój koszyk jest pusty.

Koszyk

Pomoc i kontakt

Darmowa standardowa dostawa powyżej 999 zł

Newsletter

Promocje

Ponad 300 000 klientów - dziękujemy!

4,93/5 "Bardzo dobry" (ponad 1400 recenzji)

Ponad 40 000 produktów do polowania i strzelectwa

BROWNELLS
STEEL PILOTS

050806018068 080686323

Centruje Narzędzia Dla Precyzyjnej Pracy

Utwardzony stalowy pilot utrzymuje narzędzia do obróbki czoła i fazowania w odpowiednim centrum lufy. Odporny na zużycie przez wiele lat użytkowania.

Wybierz jeden z poniższych zestawów do innych luf broni długiej/krótkiej, narzędzi do obróbki cylindra i fazowania.

	Zestaw Steel One Caliber		45° Cutter & Steel Pilot
	Zestaw Brass One Caliber		45° Cutter & Brass Pilot
	90° Cutter & Steel Pilot		Zestawy Combo do fazowania i obróbki czoła
	90° Cutter & Brass Pilot		Tylko Brass Pilot

SPECS: Utwardzona stal. Długość 1¼" (3.2cm). .45 ACP Pilots - .45 ACP-1 pasuje do modelu S&W 25 & 625. .45 ACP-2 pasuje do Colt 1917.

Więcej...

Centers Cutters For Accurate Work

Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.

Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.

	Steel One Caliber Set		45° Cutter & Steel Pilot
	Brass One Caliber Set		45° Cutter & Brass Pilot
	90° Cutter & Steel Pilot		Chamfering & Facing Combo Sets
	90° Cutter & Brass Pilot		Brass Pilot Only

SPECS: Hardened steel. 1¼" (3.2cm) long. .45 ACP Pilots - .45 ACP-1 fits S&W model 25 & 625. .45 ACP-2 fits Colt 1917.

Więcej...

Oceny klientów dla BROWNELLS STEEL PILOT FOR 8MM & .32-40 MUZZLE

Liczba ocen: 10
Od brownells.com: 10
Średnia ocena: 4,1

Too big for S&W 625 (15-09-2010)

Larger then the 45-1 and that needs to be fit to work with the 625 cylinder

Almost a perfict fit (15-09-2010)

This is the one for the S&W625, it must be turned down for a nice tight wobble free fit but will not wear out after that. Well machined and concentric.

Too small for S&W 610 (15-09-2010)

Very well made, concentric and smooth machining but too small to fit the S&W 610 10mm cylinder. Get the 41mag and turn it down for a perfect zero wobble fit.

Yes this works with Mosins (03-08-2013)

I ordered this pilot for use with an 11 degree muzzle crown tool for my Mosin Nagant rifles. The good, it fit perfect with no wobble. The bad this worked on only one of my rifles, the project gun I ordered it for had a bore diameter of less than .311. No problem I will just order the .30 caliber pilot. I could have ordered the .30 caliber size to begin with but I didn't want a loose fit or have to use a cloth patch to "make" it work.

It is a quality made tool and I can see it lasting a long time with proper care. Yes it works with some Mosins. if you have multiple rifles be prepared to order both of the pilots so you get a perfect fit.

Good quality product (13-11-2009)

The pilot has the look of good quality. The pilot fits the cutter and the muzzle real well.

This fits Mosin Nagant Rifles (10-08-2013)

Good quality pilot, no wobble when used in the proper size bore.

I had a tighter bore Mosin and this worked perfectly. I also ordered the .311 steel pilot to fit my Type 53 Mosin.

If you only plan on buying one pilot to work in all Mosins get this one. If your bore is a little bigger, use a cloth patch to make a tighter fit. This pilot will be loose in the more traditional .311 bore size.

Good quality product. (06-11-2009)

The pilot has the look of good quality. It fits the cutter real well. It also fits real well in the muzzel.

Good quality product. (06-11-2009)

The pilot has the look of qood quality. It fits the cutter real well. It also has a real good fit in the muzzel.

Good quality product. (08-11-2009)

The pilot has a look of good quality. It fits the cutter real well. It also has a good fit in the muzzel.

Good quality product (13-11-2009)

The pilot has the look of good quality. It also fits both the muzzle and cutter real well.

Zobacz 10 dodatkowych opinii na brownells.com

134 174 44 PLN

Nr produktu: 080686323
BROWNELLS STEEL PILOT FOR 8MM & .32-40 MUZZLE 050806018068 Utwardzony stalowy pilot utrzymuje narzędzia do obróbki czoła i fazowania w odpowiednim centrum lufy. Odporny na zużycie przez wiele lat użytkowania.

169 PLN 2 169,00 zł *

Czas dostawy ok. 14-21 dni.
2 szt. w magazynie w USA

Specyfikacja: Caliber: 8 mm (.323) Material: Steel

BROWNELLS STEEL PILOTS

Oceny klientów dla BROWNELLS STEEL PILOT FOR 8MM & .32-40 MUZZLE

Cechy

Szczegóły pozycji

Oceny klientów dla BROWNELLS STEEL PILOT FOR 8MM & .32-40 MUZZLE

Podłącz

Bezpieczne metody płatności

Stowarzyszenia branżowe

Witamy!

BROWNELLS
STEEL PILOTS