Wydłuża się o pół cala (około 1,27 cm) dalej niż "wbudowane" fabryczne zwolnienie, dzięki czemu łatwiej je trafić i obsługiwać, gdy musisz szybko zmienić magazynki. Cienki, kompaktowy kształt nie będzie cię kłuł w plecy, jeśli nosisz swoją broń na pasku. Montaż bez potrzeby korzystania z usług rusznikarza.
W magazynie
Czas dostawy ok. 14-21 dni. Ponad 10 sztuk w magazynie w USA
Czas dostawy ok. 14-21 dni. Ponad 10 sztuk w magazynie w USA
Kompaktowy kształt jest szybszy do trafienia; nie przeszkadza
Wydłuża się o pół cala (około 1,27 cm) dalej niż "wbudowane" fabryczne zwolnienie, dzięki czemu łatwiej je trafić i obsługiwać, gdy musisz szybko zmienić magazynki. Cienki, kompaktowy kształt nie będzie cię kłuł w plecy, jeśli nosisz swoją broń na pasku. Montaż bez potrzeby korzystania z usług rusznikarza.
Compact Shape Is Faster To Hit; Won't Get In The Way
Extends half an inch farther out than the "flush" factory release so it's easier to hit and operate when you're in a hurry to change magazines. Thin, compact shape won't poke you in the back if you carry your rifle in a sling. Installs without gunsmithing.
Cechy
Model:10/22
Typ broni:Ruger
Waga dostawy:0,023kg
Wysokość wysyłki:13mm
Szerokość wysyłki:18mm
Długość wysyłki:94mm
Szczegóły pozycji
Made in USA
US export classification: 0A501.x
Opinie klientów
Oceny klientów (12)
4,3 / 5
Polecane
Works well, but dimensions are small. 05-09-2018
Good quality and very sturdy. It functions very well, not too long and not too short. My only issue is the dimensions are on the small side, making the part sit loosely in the trigger. It even rattles. Even when a magazine is inserted it will rattle. This could give away your position if your sneaking up on game. Other than that it works.
Polecane
Much needed upgrade 20-02-2017
Solid replacement for the flimsy plastic and far too small original release.
Easy to swap out and SOLID.
Only gripe is the edge seeing that the mag release and bolt release are in tight quarters. The edges are not sharp per say but would serve tiny and weaker hands much better to be rounded out. I am not a small shooter nor have weak hands and this is an annoyance for me.
A side note, I will never buy Ruger again!!!! the "need" for this product and others on the 10-22 are ridiculous. The 10-22 is supposed to be one of the most reliable platforms in existance and was purchaed for a new shooter. I have had to perform more modifications and cleaning up from a lack of proper fit or finish due to Ruger manufacturing.
Zdecydowanie polecane
What was looking for 29-11-2016
Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory
Polecane
Great design, will last a lifetime 04-01-2014
All steel, dimensionally perfect for hi-cap magazines. This is the only mag catch that I tried to accommodate the Pro-Mag Archangel Nomad magzine with sleeve, except the vintage Eagle polymer magazine catch of the 1980's. I would have given it a 5-star if the part has been serrated for non-slip operation and aesthetics. I have added a 20 l.p.i. on the paddle and it work even better and looks phenomenal. Excellent price tag.
Zdecydowanie polecane
Great product! 13-06-2012
It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.
Zdecydowanie polecane
Greatly eases releasing a magazine 19-10-2011
Factory magazine release was stiff and did not drop the magazine easily, had to get a good grip on the magazine and pull or flip it out with a screw driver/car key. This magazine release is as easy as pushing the lever with a knuckle and the magazine will drop free. Basically how the factory release should be, I highly recommend this to anyone with a 10/22.
Delikatna rekomendacja
10/22 SS Ext. Mag Release 02-10-2011
Firstly, easy to install. Ejects magazines without effort. However, the corners are sure to poke you pretty hard. It could use some buffing out because if you look at the photo, which I didn't, there are a lot of tool marks. But you won't see it once it's installed but I can see what looks like a cracks or other squiggy looking folds. Is this part a casting poured from a mold?
Zdecydowanie polecane
vast improvement over stock mag. release 18-06-2011
This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.
Polecane
Working as expected 02-02-2011
Easy to install and works like expected.
Zdecydowanie polecane
Very good for older 10/22's 10-09-2010
Older 10/22's need these releases. Maybe that's why new ones come with similar ones installed?
Only one problem: The description said it is blued, but mine is parkerized. Not a problem, but (barely) worth noting. Parkerized steel is more rust-resistant than blued.
Polecane
Size is decieving 28-08-2010
When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.
Zdecydowanie polecane
Work's great 10-04-2010
Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.
Odpowiedzialny podmiot gospodarczy zgodnie z rozporządzeniem UE
Brownells Polska Sp. z o.o.
Armii Krajowej 77
05-071 Sulejówek
Polska
info@brownells.pl
Ostatnio oglądane
Ups! Coś poszło nie tak.
Napotkaliśmy błąd podczas wczytywania tej zawartości. Odśwież stronę, aby kontynuować. Jeśli problem będzie się powtarzał, skontaktuj się z naszym działem obsługi klienta.
Ułatwiaj wymianę magazynków w swoim Ruger 10/22 dzięki niebieskiemu zamek magazynka. 🔧 Prosty montaż i ergonomiczny kształt!
Elementy te są kontrolowane przez rząd USA i dopuszczone do eksportu tylko do kraju docelowego przeznaczenia do wykorzystania przez ostatecznego odbiorcę lub użytkowników końcowych określonych w niniejszym dokumencie. Nie można ich odsprzedawać, przekazywać ani w inny sposób rozdysponowywać do żadnego innego kraju ani do żadnej innej osoby niż upoważniony odbiorca końcowy lub użytkownik końcowy, w oryginalnej postaci lub po włączeniu do innych przedmiotów, bez uprzedniego uzyskanie zgody od rządu USA lub w inny sposób zatwierdzony przez prawo i przepisy USA.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Elementy te są kontrolowane przez rząd USA i dopuszczone do eksportu tylko do kraju docelowego przeznaczenia do wykorzystania przez ostatecznego odbiorcę lub użytkowników końcowych określonych w niniejszym dokumencie. Nie można ich odsprzedawać, przekazywać ani w inny sposób rozdysponowywać do żadnego innego kraju ani do żadnej innej osoby niż upoważniony odbiorca końcowy lub użytkownik końcowy, w oryginalnej postaci lub po włączeniu do innych przedmiotów, bez uprzedniego uzyskanie zgody od rządu USA lub w inny sposób zatwierdzony przez prawo i przepisy USA.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Wysokiej jakości zamienniki sprężyn do AR-15, wyprodukowane z precyzyjnymi tolerancjami.
Świetne jako zapasowe części awaryjne lub do składania karabinu z części, dostępne pojedynczo lub w pakietach po 3 sztuki.
Sprężyny wykonane z chromowo-krzemowej stali, co zapewnia trwałość i niezawodność.
Podstawy i ostrza wykonane z wysokowytrzymałego, odpornego na rdzę stopu aluminium z anodowanym wykończeniem na czarno.
Regulacje kąta poziomego i pionowego z zabezpieczeniem na zatrzaski gib, które można szybko dokonać, poluzowując jedną śrubę.
Pasuje do luf o średnicy od .900" do 1", z rozstawem otworów środek-do-środka .5625".
Precyzyjny, kuty dolny odbiornik firmy Wilson Combat jest idealnym fundamentem do budowy karabinu AR-15.
Naturalne wżery i ślady obróbki maszynowej nie wpływają na funkcjonowanie odbiornika.
Odbiornik ma styl Stripped, wykończenie Anodized i jest przeznaczony dla karabinków na nabój 5.56 mm NATO.