Zaprojektowany przez mistrza strzelectwa Chipa McCormicka z jego unikalnym, płaskim śledziem, który zapewnia większą pojemność. Wszystkie modele mają stałą bazę, która jest przewiercona dla łatwej instalacji podkładki. Wszystkie sprężyny są firmy Wolff.
SPECS: Stal nierdzewna, matowe wykończenie. .45 Gov’t - 5" (12.7 cm) długości, 5½" (13.3 cm) z podkładką, 8 naboi.
Więcej...
Extra Capacity & Reliable Feeding
Designed by champion shooter Chip McCormick with his unique, flat follower to give more capacity. All feature a fixed base that's drilled for easy pad installation. All springs are by Wolff.
Oceny klientów dla CHIP MCCORMICK CUSTOM .45 GOV'T NO PAD
Liczba ocen: 8
Od brownells.com: 8
Średnia ocena: 4,3
1911 magazines(23-06-2009)
These work great, no issues. Excellent mags
Range use ONLY!!(02-02-2010)
I own several of these mags. When they are NEW they work fine but after only a few dozen times of loading & unloading, the distance in the feed ramp begins to close and then they start to fail. Mine began to tilt, which caused the weapon to fail. I tried spacing the mags back out but this didn't work for long. Now they are nothing more than range mags used to produce malfunctions to practice clearing procedures. For no reason would I use them for carry purposes, even new.
Not Worth It(09-08-2010)
Hello,
I bought two of these, and have seen several more.
One of the ones I bought had a warped body and would not fall free. The other worked as advertised - for a while.
Feeding and slide lock became issues after a few hundred rounds apiece. I traced this to the followers; replacing them with standard dimpled followers from seven round military magazines made them work, and work well.
Bottom line: The bodies are good about half the time. They will not be so warped as to prevent feeding, though they may not fall free. The followers and springs should be replaced with quality seven round aftermarket parts.
I'm amazed....(03-06-2011)
...that these magazines have ANY poor reviews.
I've used many Shooting Star mags over the years and they are the best value there is out there.
There are more expensive mags. There are fancier mags. I haven't had one not work yet...and without "tuning." If your gun is set up right, these mags run.
Great Mags(19-12-2012)
These mags are terrific! I have used them over about the last 12 years and they are the only mags I use in my Colt and S.A. 1911's. I have had the blued steel and stainless and both types have worked great. They cycle fine,fit great and drop free on their own, even the older ones.
second purchase(25-12-2012)
I bought CMC magazines in the past, and have had no issues. When I needed more magazines for work, I did not hesitate to buy CMC magazines again.
Works perfect with a PM7(03-04-2018)
To be honest this mag looks identical to the standard Dan Wesson mags that comes with my PM7. The end plate is definitely different but the rest of the magazine frame, the follower and the spring are almost identical.
Worked pretty flawlessly with my pm7 too. Iâm happy.
My only complains are the follower is metal and the end plate looks awkward when it was seated in my pistol
Nr produktu: 207145208 CHIP MCCORMICK CUSTOM .45 GOV'T NO PAD Numer części: M-MG-45FS8705263141100 Zaprojektowany przez mistrza strzelectwa Chipa McCormicka z jego unikalnym, płaskim śledziem, który zapewnia większą pojemność. Wszystkie modele mają stałą bazę, która jest przewiercona dla łatwej instalacji podkładki. Wszystkie sprężyny są firmy Wolff.
259PLN8259,00 zł
*
Czas dostawy ok. 14-21 dni. 8 szt. w magazynie w USA
Made in USA
US export classification: 0A501.x
Elementy te są kontrolowane przez rząd USA i dopuszczone do eksportu tylko do kraju docelowego przeznaczenia do wykorzystania przez ostatecznego odbiorcę lub użytkowników końcowych określonych w niniejszym dokumencie. Nie można ich odsprzedawać, przekazywać ani w inny sposób rozdysponowywać do żadnego innego kraju ani do żadnej innej osoby niż upoważniony odbiorca końcowy lub użytkownik końcowy, w oryginalnej postaci lub po włączeniu do innych przedmiotów, bez uprzedniego uzyskanie zgody od rządu USA lub w inny sposób zatwierdzony przez prawo i przepisy USA.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Nr produktu: 207145218 CHIP MCCORMICK CUSTOM MATCH GRADE, .45 ACP, 8 ROUND, STAINLESS, W/ PAD Numer części: M-MG-45FS8-P705263141117 Zaprojektowany przez mistrza strzelectwa Chipa McCormicka z jego unikalnym, płaskim śledziem, który zapewnia większą pojemność. Wszystkie modele mają stałą bazę, która jest przewiercona dla łatwej instalacji podkładki. Wszystkie sprężyny są firmy Wolff.
284PLN12284,00 zł
*
Czas dostawy ok. 14-21 dni. Ponad 10 sztuk w magazynie w USA
Zaprojektowany przez mistrza strzelectwa Chipa McCormicka z jego unikalnym, płaskim śledziem, który zapewnia większą pojemność. Wszystkie modele mają stałą bazę, która jest przewiercona dla łatwej instalacji podkładki. Wszystkie sprężyny są firmy Wolff.
SPECS: Stal nierdzewna, matowe wykończenie. .45 Gov’t - 5" (12.7 cm) długości, 5½" (13.3 cm) z podkładką, 8 naboi.
Więcej...
Extra Capacity & Reliable Feeding
Designed by champion shooter Chip McCormick with his unique, flat follower to give more capacity. All feature a fixed base that's drilled for easy pad installation. All springs are by Wolff.
Oceny klientów dla CHIP MCCORMICK CUSTOM .45 GOV'T NO PAD
Liczba ocen: 8
Od brownells.com: 8
Średnia ocena: 4,3
1911 magazines(23-06-2009)
These work great, no issues. Excellent mags
Range use ONLY!!(02-02-2010)
I own several of these mags. When they are NEW they work fine but after only a few dozen times of loading & unloading, the distance in the feed ramp begins to close and then they start to fail. Mine began to tilt, which caused the weapon to fail. I tried spacing the mags back out but this didn't work for long. Now they are nothing more than range mags used to produce malfunctions to practice clearing procedures. For no reason would I use them for carry purposes, even new.
Not Worth It(09-08-2010)
Hello,
I bought two of these, and have seen several more.
One of the ones I bought had a warped body and would not fall free. The other worked as advertised - for a while.
Feeding and slide lock became issues after a few hundred rounds apiece. I traced this to the followers; replacing them with standard dimpled followers from seven round military magazines made them work, and work well.
Bottom line: The bodies are good about half the time. They will not be so warped as to prevent feeding, though they may not fall free. The followers and springs should be replaced with quality seven round aftermarket parts.
I'm amazed....(03-06-2011)
...that these magazines have ANY poor reviews.
I've used many Shooting Star mags over the years and they are the best value there is out there.
There are more expensive mags. There are fancier mags. I haven't had one not work yet...and without "tuning." If your gun is set up right, these mags run.
Great Mags(19-12-2012)
These mags are terrific! I have used them over about the last 12 years and they are the only mags I use in my Colt and S.A. 1911's. I have had the blued steel and stainless and both types have worked great. They cycle fine,fit great and drop free on their own, even the older ones.
second purchase(25-12-2012)
I bought CMC magazines in the past, and have had no issues. When I needed more magazines for work, I did not hesitate to buy CMC magazines again.
Works perfect with a PM7(03-04-2018)
To be honest this mag looks identical to the standard Dan Wesson mags that comes with my PM7. The end plate is definitely different but the rest of the magazine frame, the follower and the spring are almost identical.
Worked pretty flawlessly with my pm7 too. Iâm happy.
My only complains are the follower is metal and the end plate looks awkward when it was seated in my pistol