Twój koszyk jest pusty.

Koszyk

Pomoc i kontakt

Darmowa standardowa dostawa powyżej 999 zł

Newsletter

Promocje

Ponad 300 000 klientów - dziękujemy!

4,93/5 "Bardzo dobry" (ponad 1400 recenzji)

Ponad 40 000 produktów do polowania i strzelectwa

WILSON COMBAT
#321 S&W J FRAME SPRING KIT

874218000943 965321000

Zwiększ niezawodność, popraw funkcjonowanie

Sprężyny wysokiej jakości do szybkiego montażu, które poprawiają wydajność broni krótkiej. Drut o wysokiej wytrzymałości zapewnia niezawodne działanie. #321 S&W J Frame Spring Kit - sprężyna młotka RP 8 lb; sprężyny zwrotne RP 13, 14 & 15 lb.

SPECS: RP = Zmniejszona moc, XP = Zwiększona moc.

Więcej...

Add Reliability, Improve Function

High quality springs drop-in to improve handgun performance. High tensile strength wire delivers reliable function. #321 S&W J Frame Spring Kit - RP 8 lb hammer spring; RP 13, 14 & 15 lb rebound springs.

SPECS: RP = Reduced Power, XP = Extra Power.

Więcej...

Oceny klientów dla WILSON COMBAT WILSON KIT # 321

Liczba ocen: 7
Od brownells.com: 7
Średnia ocena: 4,6

It's OK. (04-01-2011)

The hammer spring installed fine. But the 13# rebound spring was too long to install. Which I don't understand. Emailed Wilson Combat for advice with no success. Had to settle for the 14# spring instead.....good thing there were three choices huh? Trigger pull was marginally lighter but very rough.

Worked great (08-04-2011)

Unlike a previous reviewer I phoned Wilson about the too-long trigger return springs. They said that was on purpose as different age J frames may have different length springs. They said cut them to the length of the factory spring you remove. If you don't have a lathe to make one you should buy one of the two trigger return spring installation tools sold by Brownell's. Buying this kit doesn't make you a gunsmith. I also reccomend the Jerry Miculec trigger job video from Brownell's.

Worked fine for me!!! (26-02-2012)

http://www.youtube.com/watch?v=JIUfmg1JulE was a good video showing me how to do this. I would recommend using some grease this makes the re-assembly much better

Well worth the money (16-03-2012)

If you know what your doing, your can drastically change the trigger pull. This is definitely not a first timers project. If you have done gunsmithing previous, these springs with the appropiate polishing will definitely enhance the trigger pull.

First Timers Can Install This Kit (16-03-2013)

First timers will have no problems installing these springs if they follow the procedures shown in several online videos. No special tools required. Using only a 1/8" wide flat tipped screwdriver had no issues with either the hammer spring or 13# rebound slide spring during installation into my model 042. Neither spring required cutting. As a precaution against a flyaway slide spring, looped waxed dental floss through the OEM spring and tied off to trigger guard prior to spring removal. Did a similar thing with the replacement spring prior to installation. Once the spring is installed, the waxed floss easily pulls free. Reduced trigger pull by 1#-14.0 oz down to 9#-3.5 oz.

Wife would not shoot S&W Mod.60 without. (04-02-2016)

Was looking to buy another revolver for the Wife until I installed

the hammer spring and the middle trigger return spring in my S&W Model 60. Friends now want the kit for their J frame.

Wilson Combat - the revolver experts? (26-08-2016)

I didn't, and doubt that most shooters think of Wilson Combat as revolver experts. Think again. I installed their spring kit for S&W J Frame in my Model 37. Before: 12+ lb. double action, 5 lb. single action pull. After: 8.5 lb. double and 3 lb. single action, testing 100% reliable ignition with 5 different loads from 4 different brands of factory ammo, tested double and single action! Easily installed after watching some Youtube instructional videos. The only special tool I recommend is the inexpensive S&W trigger return spring tool from Brownells. I installed the hammer spring and the lightest of the trigger return springs, which functions just fine. Pretty much same story with the Wilson K/L/N Frame spring kit in my Model 10.

Zobacz 7 dodatkowych opinii na brownells.com

94 94 1 PLN

Nr produktu: 965321000
WILSON COMBAT WILSON KIT # 321
Numer części: 321 874218000943 Sprężyny wysokiej jakości do szybkiego montażu, które poprawiają wydajność broni krótkiej. Drut o wysokiej wytrzymałości zapewnia niezawodne działanie. #321 S&W J Frame Spring Kit - sprężyna młotka RP 8 lb; sprężyny zwrotne RP 13, 14 & 15 lb.

94 PLN 8 94,00 zł *

Czas dostawy ok. 14-21 dni.
8 szt. w magazynie w USA

Dodaj do listy zakupów

Zapytaj

Szczegóły

Dodaj do listy zakupów

Zapytaj

Cechy

Waga dostawy: 0,009kg Szerokość wysyłki: 83mm Długość wysyłki: 146mm UPC : 874218000943

Szczegóły pozycji

Made in USA

Zestaw sprężyn #321 S&W J Frame od WILSON COMBAT poprawia wydajność broni 🔧. Wysokiej jakości sprężyny do szybkiego montażu.

Zwiększ niezawodność, popraw funkcjonowanie

SPECS: RP = Zmniejszona moc, XP = Zwiększona moc.

Więcej...

Add Reliability, Improve Function

SPECS: RP = Reduced Power, XP = Extra Power.

Więcej...

Oceny klientów dla WILSON COMBAT WILSON KIT # 321

Liczba ocen: 7
Od brownells.com: 7
Średnia ocena: 4,6

It's OK. (04-01-2011)

Worked great (08-04-2011)

Worked fine for me!!! (26-02-2012)

http://www.youtube.com/watch?v=JIUfmg1JulE was a good video showing me how to do this. I would recommend using some grease this makes the re-assembly much better

Well worth the money (16-03-2012)

First Timers Can Install This Kit (16-03-2013)

Wife would not shoot S&W Mod.60 without. (04-02-2016)

Was looking to buy another revolver for the Wife until I installed

the hammer spring and the middle trigger return spring in my S&W Model 60. Friends now want the kit for their J frame.

Wilson Combat - the revolver experts? (26-08-2016)

Zobacz 7 dodatkowych opinii na brownells.com