Twój koszyk jest pusty.

Koszyk

Pomoc i kontakt

Darmowa standardowa dostawa powyżej 999 zł

Newsletter

Promocje

Ponad 300 000 klientów - dziękujemy!

4,93/5 "Bardzo dobry" (ponad 1400 recenzji)

Ponad 40 000 produktów do polowania i strzelectwa

ED BROWN
FRONT SIGHT TOOL for GLOCK®

800732952000 087017001

Łatwe montowanie/demontowanie przednich celowników Glocka

Pasuje do małej śruby z łbem sześciokątnym, która utrzymuje miejsce celowników pośrednich w Glocku. Ułatwia instalację zamiennych celowników lub demontaż celowników do konserwacji, minimalizując ryzyko uszkodzeń. Trzpień sześciokątny pasuje do śrubokrętów Magna-Tip®. Nie nadaje się do użytku z zamkami o długości 6".

SPECS: Stal.

Więcej...

Easily Removes/Installs Glock Front Sights

Fits the small, hex head screw that holds Glock aftermarket sights in place. Makes installing replacement sights or removing sights for maintenance easier with less chance of damage. Hex shank fits Magna-Tip® screwdrivers. Not for use with 6" slides.

SPECS: Steel.

Więcej...

Oceny klientów dla ED BROWN FRONT SIGHT TOOL FOR GLOCK

Liczba ocen: 9
Od brownells.com: 9
Średnia ocena: 3,1

Decent if on a budget (05-10-2009)

This tool works fairly well if you just need to install a front sight or two and don't want to spent a lot of money.

There is a bit too much depth to the socket, allowing the nut for the front sight to rotate a bit - this makes getting the threaded portion of the nut lined up properly with the hole in the front sight tricky.

Can be made to work (04-06-2010)

I know the information says it doesn't fit Glock Longslides, I should have read further before buying. The tool's diameter is .262 and the hole on a longslide is .250. The tool's instructions say dremel out the hole on the slide, NO WAY! Put this in my drill press and used a diamond hone to get it down to the right size and now I have a front sight tool that works in all Glocks. The hex head fits in a socked which I really like. My recommendation is buy a tool that works if you can find one. If you can't, this can be made to work.

Trijicon includes this tool with sights (23-06-2010)

I got this same tool in every package of Tritium sights I bought from Trijicon. You may not want to purchase this separately. It is a cheap but necessary tool for removing Glock Front sights. It is not necessary to have to remove the manufacturer's plastic sight

Works fine (19-03-2011)

This tool works on the new Glock 3/16" sight nuts as well as Meprolights.

piece of junk (13-04-2011)

screw did not in fit this tool squarely. either screw or tool was defective. i had to put screw in with tweezers and fingers. NOT WORTH THE [$]. SAVE YOUR $$$ AND GO TO PLAN "B"...thanks anyway.

One trick pony (02-09-2012)

Even though it has only one use it does the job. Sturdy, handy, and necessary for any Glock owner.
Best buy and it was delivered in 2 days

Works After Modification (01-02-2014)

I had already made a tool for Glock front sight screws by filing down a 3/16" socket bit for a screwdriver. I was hoping that the EB bit would fit out of the package, but I had to file it down to make the walls of the socket thin enough to fit down over the screw head. After a little careful filing, it worked fine. Being SS, I expect it to be more durable than the socket bit, but time will tell. As other reviews have mentioned, the hole in the end could have been a lot shallower. I packed mine with tissue paper to
keep the screw from disappearing into the hole.

Don't Waste Your Time/Money (24-03-2016)

This tool doesn't work very well. Once it arrived the instructions told you to modify your gun with a dremel tool, so the this tool could fit onto the hex head screw. I'm not going to use a dremel on my Glock to replace the sights. I am going to buy another tool.

good but not (26-11-2017)

The Ed Brown glock front site tool is well made. The machining is excellant but it is short in length, when the driver is on the front site screw head, it is next to impossible to get a grip on the tool to unscrew and securely screw the screw back in place. You have to place a socket on the head of the tool to use it which for the money it could just be made longer.

Zobacz 9 dodatkowych opinii na brownells.com

169 169 1 PLN

Nr produktu: 087017001
ED BROWN FRONT SIGHT TOOL FOR GLOCK
Numer części: 952 800732952000 Pasuje do małej śruby z łbem sześciokątnym, która utrzymuje miejsce celowników pośrednich w Glocku. Ułatwia instalację zamiennych celowników lub demontaż celowników do konserwacji, minimalizując ryzyko uszkodzeń. Trzpień sześciokątny pasuje do śrubokrętów Magna-Tip®. Nie nadaje się do użytku z zamkami o długości 6".

169 PLN 2 169,00 zł *

Czas dostawy ok. 14-21 dni.
2 szt. w magazynie w USA

Specyfikacja: Make: Glock Model: Universal Handguns

Dodaj do listy zakupów

Zapytaj

Szczegóły

Dodaj do listy zakupów

Zapytaj

Top takeaways

Pasuje do małej śruby z łbem sześciokątnym, która utrzymuje miejsce celowników pośrednich w Glocku.
Ułatwia instalację zamiennych celowników lub demontaż celowników do konserwacji, minimalizując ryzyko uszkodzeń.
Trzpień sześciokątny pasuje do śrubokrętów Magna-Tip®.

Cechy

Model: Universal Handguns Wytwórca: Glock Waga dostawy: 0,014kg Szerokość wysyłki: 83mm Długość wysyłki: 146mm UPC : 800732952000

Szczegóły pozycji

Made in USA

Ułatw sobie instalację celowników w Glocku z narzędziem FRONT SIGHT TOOL 🔧 od ED BROWN. Idealne do konserwacji i wymiany celowników!

Łatwe montowanie/demontowanie przednich celowników Glocka

SPECS: Stal.

Więcej...

Easily Removes/Installs Glock Front Sights

SPECS: Steel.

Więcej...

Oceny klientów dla ED BROWN FRONT SIGHT TOOL FOR GLOCK

Liczba ocen: 9
Od brownells.com: 9
Średnia ocena: 3,1

Decent if on a budget (05-10-2009)

Can be made to work (04-06-2010)

Trijicon includes this tool with sights (23-06-2010)

Works fine (19-03-2011)

This tool works on the new Glock 3/16" sight nuts as well as Meprolights.

piece of junk (13-04-2011)

screw did not in fit this tool squarely. either screw or tool was defective. i had to put screw in with tweezers and fingers. NOT WORTH THE [$]. SAVE YOUR $$$ AND GO TO PLAN "B"...thanks anyway.

One trick pony (02-09-2012)

Even though it has only one use it does the job. Sturdy, handy, and necessary for any Glock owner.
Best buy and it was delivered in 2 days

Works After Modification (01-02-2014)