Wyjątkowo duży i łatwo dostępny dźwignia zwalniania magazynka zastępuje oryginalną część fabryczną, umożliwiając szybkie i pewne zmiany magazynka podczas walki lub zawodów. Przycisk o powiększonych rozmiarach z pionową, naciętą powierzchnią zapewnia doskonałe wypoziomowanie z palcem dla pewnego zwolnienia bez poślizgu w każdych warunkach pogodowych. Wykonany z hartowanej stali dla zwiększonej trwałości, a następnie parkeryzowany dla lepszej odporności na zużycie i korozję.
SPECS: Stal, wykończenie parkeryzowane. Utwardzane do Rc 55. Całkowita długość 1-13⁄16" (2.6cm). Pad - długość 13⁄16" (4.6cm) x szerokość 13⁄16" (4.6cm). Waga .7 oz. (19.8g). Wymaga drobnych dopasowań, zawiera piny montażowe.
Więcej...
Oversize Pad For Fast Magazine Changes
Extra large, easy-to-reach magazine release lever replaces the original factory part for fast, positive mag changes during combat or competition. Oversize pad with vertical, serrated surface provides perfect alignment with your finger for a positive, no-slip release in all weather conditions. Machined from case hardened steel for added durability, then Parkerized for superior wear resistance and corrosion protection.
SPECS: Steel, Parkerized finish. Hardened to Rc 55. 1-13⁄16" (2.6cm) OAL. Pad - 13⁄16" (4.6cm) long x 13⁄16" (4.6cm) wide. .7 oz. (19.8g) weight. Minor fitting required, includes mounting pins.
Więcej...
Oceny klientów dla SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE
Liczba ocen: 10
Od brownells.com: 10
Średnia ocena: 4,8
A must have!(16-01-2010)
Makes tactical mag changes faster and easier! The perfect addition to any EBR style rifle (or any M14/M1A/Socom for that matter). Very high quality.
great product(19-05-2010)
very simple to change this part. installation instructions go step buy step. makes mag change super easy and very fast
good add on part(21-08-2010)
This part is a must for anyone who comes to my shop and wants to upgrade thier m1a's in any way, ebr,tactical config, etc,. The quality is excellent, fit and finish are perfect. The product makes mag changes much faster and gives the operator of the weapon a positive feel on mag changes.
For USGI spec rifles.Will not fit metric(11-07-2012)
This part is really a 5 star quality part but I gave it 3 so people would check the review and not get the wrong part. Sadlak makes two versions of this latch. One for standard rifles (USGI) spec and one for metric Chinese made rifles. This is the standard version. metric rifles need a larger pin size. This thing is so hard (55 Rc) that it is not practical trying to enlarge the hole with standard drill bits/drills. Look elsewhere if you are working on a metric M14 clone. By the way, this thing came with one of the best installation guides I have ever seen with an aftermarket part.
Great fit on Springfield bush rifle(27-08-2012)
A must have for anyone wiht M1A/M14 rifle. Fairly easy to install (except for the heavy duty spring) and makes mag change a snap. Cost is somewhat high for such a small metal piece but worth it.
worth buying(12-09-2012)
great for quick easy mag changes, install 15-20 mins.
GREAT ADDITION TO MY RIFLE(27-11-2012)
I just finished installing this on my rifle along with the Smith Enterprise Bolt Stop. This piece was fairly easy to install and works great. A big improvement over the factory part.
Mag changes made easy(20-03-2015)
Easy to install, directions were crystal clear. Width of the plate is about a hair smaller than the actual magazine, so no catching on your clothing. The only downside is that more force is required to seat a magazine if it's loaded than the stock part, but practice will compensate for that.
Sadlak makes very good products for the M14 and this is yet another example of exactly that. Installation is very easy and clear to follow with the instructions provided; they even supply a taper punch to use. The only tools you will need is a piece of wood to work on and a brass hammer. Installation will take about 5-10 minutes, very easy and fast.
Magazine manipulation is drastically different from the stock part. Insertion and extraction is much easier especially if using gloves.
Good part. Worth it (03-03-2016)
Great addition. Easier to find in a rush, or when wearing gloves.
Nr produktu: 100004037 SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE Numer części: 140040 Wyjątkowo duży i łatwo dostępny dźwignia zwalniania magazynka zastępuje oryginalną część fabryczną, umożliwiając szybkie i pewne zmiany magazynka podczas walki lub zawodów. Przycisk o powiększonych rozmiarach z pionową, naciętą powierzchnią zapewnia doskonałe wypoziomowanie z palcem dla pewnego zwolnienia bez poślizgu w każdych warunkach pogodowych. Wykonany z hartowanej stali dla zwiększonej trwałości, a następnie parkeryzowany dla lepszej odporności na zużycie i korozję.
319PLN12319,00 zł
*
Czas dostawy ok. 14-21 dni. Ponad 10 sztuk w magazynie w USA
Made in USA
US export classification: 0A501.x
Elementy te są kontrolowane przez rząd USA i dopuszczone do eksportu tylko do kraju docelowego przeznaczenia do wykorzystania przez ostatecznego odbiorcę lub użytkowników końcowych określonych w niniejszym dokumencie. Nie można ich odsprzedawać, przekazywać ani w inny sposób rozdysponowywać do żadnego innego kraju ani do żadnej innej osoby niż upoważniony odbiorca końcowy lub użytkownik końcowy, w oryginalnej postaci lub po włączeniu do innych przedmiotów, bez uprzedniego uzyskanie zgody od rządu USA lub w inny sposób zatwierdzony przez prawo i przepisy USA.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Zwiększ efektywność swojego M14/M1A z dźwignią zwalniania magazynka od SADLAK INDUSTRIES! 💪 Trwałość i pewność w każdych warunkach.
Wyjątkowo duży i łatwo dostępny dźwignia zwalniania magazynka zastępuje oryginalną część fabryczną, umożliwiając szybkie i pewne zmiany magazynka podczas walki lub zawodów. Przycisk o powiększonych rozmiarach z pionową, naciętą powierzchnią zapewnia doskonałe wypoziomowanie z palcem dla pewnego zwolnienia bez poślizgu w każdych warunkach pogodowych. Wykonany z hartowanej stali dla zwiększonej trwałości, a następnie parkeryzowany dla lepszej odporności na zużycie i korozję.
SPECS: Stal, wykończenie parkeryzowane. Utwardzane do Rc 55. Całkowita długość 1-13⁄16" (2.6cm). Pad - długość 13⁄16" (4.6cm) x szerokość 13⁄16" (4.6cm). Waga .7 oz. (19.8g). Wymaga drobnych dopasowań, zawiera piny montażowe.
Więcej...
Oversize Pad For Fast Magazine Changes
Extra large, easy-to-reach magazine release lever replaces the original factory part for fast, positive mag changes during combat or competition. Oversize pad with vertical, serrated surface provides perfect alignment with your finger for a positive, no-slip release in all weather conditions. Machined from case hardened steel for added durability, then Parkerized for superior wear resistance and corrosion protection.
SPECS: Steel, Parkerized finish. Hardened to Rc 55. 1-13⁄16" (2.6cm) OAL. Pad - 13⁄16" (4.6cm) long x 13⁄16" (4.6cm) wide. .7 oz. (19.8g) weight. Minor fitting required, includes mounting pins.
Więcej...
Oceny klientów dla SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE
Liczba ocen: 10
Od brownells.com: 10
Średnia ocena: 4,8
A must have!(16-01-2010)
Makes tactical mag changes faster and easier! The perfect addition to any EBR style rifle (or any M14/M1A/Socom for that matter). Very high quality.
great product(19-05-2010)
very simple to change this part. installation instructions go step buy step. makes mag change super easy and very fast
good add on part(21-08-2010)
This part is a must for anyone who comes to my shop and wants to upgrade thier m1a's in any way, ebr,tactical config, etc,. The quality is excellent, fit and finish are perfect. The product makes mag changes much faster and gives the operator of the weapon a positive feel on mag changes.
For USGI spec rifles.Will not fit metric(11-07-2012)
This part is really a 5 star quality part but I gave it 3 so people would check the review and not get the wrong part. Sadlak makes two versions of this latch. One for standard rifles (USGI) spec and one for metric Chinese made rifles. This is the standard version. metric rifles need a larger pin size. This thing is so hard (55 Rc) that it is not practical trying to enlarge the hole with standard drill bits/drills. Look elsewhere if you are working on a metric M14 clone. By the way, this thing came with one of the best installation guides I have ever seen with an aftermarket part.
Great fit on Springfield bush rifle(27-08-2012)
A must have for anyone wiht M1A/M14 rifle. Fairly easy to install (except for the heavy duty spring) and makes mag change a snap. Cost is somewhat high for such a small metal piece but worth it.
worth buying(12-09-2012)
great for quick easy mag changes, install 15-20 mins.
GREAT ADDITION TO MY RIFLE(27-11-2012)
I just finished installing this on my rifle along with the Smith Enterprise Bolt Stop. This piece was fairly easy to install and works great. A big improvement over the factory part.
Mag changes made easy(20-03-2015)
Easy to install, directions were crystal clear. Width of the plate is about a hair smaller than the actual magazine, so no catching on your clothing. The only downside is that more force is required to seat a magazine if it's loaded than the stock part, but practice will compensate for that.
Sadlak makes very good products for the M14 and this is yet another example of exactly that. Installation is very easy and clear to follow with the instructions provided; they even supply a taper punch to use. The only tools you will need is a piece of wood to work on and a brass hammer. Installation will take about 5-10 minutes, very easy and fast.
Magazine manipulation is drastically different from the stock part. Insertion and extraction is much easier especially if using gloves.
Good part. Worth it (03-03-2016)
Great addition. Easier to find in a rush, or when wearing gloves.