Wkładane, dwustronne selektory do rodziny karabinów fn SCAR Kompatybilne z wojskowymi MK16 & MK17 Pasujące do półautomatycznych scar 16s & 17s Bezpośrednia wymiana selektorów OEM Nie wymagają stałych modyfikacji broni Prosty montaż przy użyciu istniejącej śruby
Więcej...
Drop-in, dual sided selectors for fn SCAR family Compatible w/ military MK16 & MK17 Compatible with semi-auto scar 16s & 17s Direct replacement of OEM selectors Requires no permanent modification to weapon Simple install using existing screw
Więcej...
Oceny klientów dla MAGPUL SSG SAFETY SELECTOR SET FOR FN SCAR MK16/16S/17S BLACK
Liczba ocen: 4
Od brownells.com: 4
Średnia ocena: 4,3
Not mandatory for the SCAR(23-09-2011)
Magpul SSG â FN SCAR Safety Selector
My biggest complaint about the original factory FN SCAR safety selector is that the lever is too short, and combined with a stiff mechanical assembly, it makes it difficult to switch back to SAFE mode. The SSG is advertised as being developed due to a request by a deploying unit. However, I found that the SSG attempts to offer an AR15/M16/M4-style lever without quite achieving the goal.
The SSG quality is exceptional, it is a fairly tight fit on the safety mechanism and the factory stainless dowel screws fit the threads perfectly. However, the screws are inserted in the opposite direction from my original 16S design. I am concerned the screws could back out since they are now inverted. The only thing I'd change about the design is to make both right and left side levers the same length, which should be a few millimeters longer than what is currently offered. This extra leverage would make it easier to use.
Overall: 4/5 stars, good quality, but not quite a mandatory accessory/modification for the SCAR.
Great idea, but not a must-have(23-09-2011)
My biggest complaint about the original factory FN SCAR safety selector is that the lever is too short, and combined with a stiff mechanical assembly, it makes it difficult to switch back to SAFE mode. The SSG is advertised as being developed due to a request by a deploying unit. However, I found that the SSG attempts to offer an AR15/M16/M4-style lever without quite achieving the goal.
The SSG quality is exceptional, it is a fairly tight fit on the safety mechanism and the factory stainless dowel screws fit the threads perfectly. However, the screws are inserted in the opposite direction from my original 16S design. I am concerned the screws could back out since they are now inverted. The only thing I'd change about the design is to make both right and left side levers the same length, which should be a few millimeters longer than what is currently offered. This extra leverage would make it easier to use.
Overall: 4/5 stars, good quality, but not quite a mandatory accessory/modification for the SCAR.
Problem/Solution(25-01-2012)
Problem: The factory manufactures the rifle with two diffrent sizes of selector levers. I like them both to be the same size and I prefer the longer levers. Solution: I ordered a set and mounted the long lever. Then I had a factory lever and an aftermarket lever. So I ordered a second set and installed the long lever on the other side. In hind sight I should have ordered a second long lever from FN. Oh well, what can I say. Either way I like the levers. The fit and finish is excellent.
EXCELLENT addition, minor fitting needed(02-11-2012)
THese switches are an excellent addition to your SCAR. A primary issue of concern with the SCAR is the difficulty in employing the stock switches with one hand, especially with regard to Real-World use, and dynamic relaod drills. The stock switches ar fairoly stiff, and VERY difficult to properly enage with one hand (i.e. the FIRING Hand.) These simple levers GREATLY Assist with this problem. Their grip ridges, as well as their greater length, offer better tactile input, as well as SIGNIFICANTLY greater leverage and ease of fire control employment by their user. I would say that they alleviate 85-90% of the stock issue. Additionaly, they look and feel great.
Cons: in order to properly fit them, I had to drill the stock screw hole all the way through. THis offered me better fitment and snag free employment. This was a relatively minor issue, and was strictly based on personal preference. IN order to accomplish this, simply take a small drill bit, and run it through the exiting screw hole until it comes out the other side.
Overall: a SIMPLE, EASY, CHEAP upgrade. WELL WORTH IT
Nr produktu: 100007108 MAGPUL SSG SAFETY SELECTOR SET FOR FN SCAR MK16/16S/17S BLACK Numer części: MAG499-BLK873750004990 Wkładane, dwustronne selektory do rodziny karabinów fn SCAR Kompatybilne z wojskowymi MK16 & MK17 Pasujące do półautomatycznych scar 16s & 17s Bezpośrednia wymiana selektorów OEM Nie wymagają stałych modyfikacji broni Prosty montaż przy użyciu istniejącej śruby
Made in USA
US export classification: 0A501.x
Elementy te są kontrolowane przez rząd USA i dopuszczone do eksportu tylko do kraju docelowego przeznaczenia do wykorzystania przez ostatecznego odbiorcę lub użytkowników końcowych określonych w niniejszym dokumencie. Nie można ich odsprzedawać, przekazywać ani w inny sposób rozdysponowywać do żadnego innego kraju ani do żadnej innej osoby niż upoważniony odbiorca końcowy lub użytkownik końcowy, w oryginalnej postaci lub po włączeniu do innych przedmiotów, bez uprzedniego uzyskanie zgody od rządu USA lub w inny sposób zatwierdzony przez prawo i przepisy USA.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Zestaw selektorów SCAR od MAGPUL ✨, idealny do FN SCAR MK16/16S/17S. Prosty montaż i bez modyfikacji. Wybierz jakość i funkcjonalność!
Wkładane, dwustronne selektory do rodziny karabinów fn SCAR Kompatybilne z wojskowymi MK16 & MK17 Pasujące do półautomatycznych scar 16s & 17s Bezpośrednia wymiana selektorów OEM Nie wymagają stałych modyfikacji broni Prosty montaż przy użyciu istniejącej śruby
Więcej...
Drop-in, dual sided selectors for fn SCAR family Compatible w/ military MK16 & MK17 Compatible with semi-auto scar 16s & 17s Direct replacement of OEM selectors Requires no permanent modification to weapon Simple install using existing screw
Więcej...
Oceny klientów dla MAGPUL SSG SAFETY SELECTOR SET FOR FN SCAR MK16/16S/17S BLACK
Liczba ocen: 4
Od brownells.com: 4
Średnia ocena: 4,3
Not mandatory for the SCAR(23-09-2011)
Magpul SSG â FN SCAR Safety Selector
My biggest complaint about the original factory FN SCAR safety selector is that the lever is too short, and combined with a stiff mechanical assembly, it makes it difficult to switch back to SAFE mode. The SSG is advertised as being developed due to a request by a deploying unit. However, I found that the SSG attempts to offer an AR15/M16/M4-style lever without quite achieving the goal.
The SSG quality is exceptional, it is a fairly tight fit on the safety mechanism and the factory stainless dowel screws fit the threads perfectly. However, the screws are inserted in the opposite direction from my original 16S design. I am concerned the screws could back out since they are now inverted. The only thing I'd change about the design is to make both right and left side levers the same length, which should be a few millimeters longer than what is currently offered. This extra leverage would make it easier to use.
Overall: 4/5 stars, good quality, but not quite a mandatory accessory/modification for the SCAR.
Great idea, but not a must-have(23-09-2011)
My biggest complaint about the original factory FN SCAR safety selector is that the lever is too short, and combined with a stiff mechanical assembly, it makes it difficult to switch back to SAFE mode. The SSG is advertised as being developed due to a request by a deploying unit. However, I found that the SSG attempts to offer an AR15/M16/M4-style lever without quite achieving the goal.
The SSG quality is exceptional, it is a fairly tight fit on the safety mechanism and the factory stainless dowel screws fit the threads perfectly. However, the screws are inserted in the opposite direction from my original 16S design. I am concerned the screws could back out since they are now inverted. The only thing I'd change about the design is to make both right and left side levers the same length, which should be a few millimeters longer than what is currently offered. This extra leverage would make it easier to use.
Overall: 4/5 stars, good quality, but not quite a mandatory accessory/modification for the SCAR.
Problem/Solution(25-01-2012)
Problem: The factory manufactures the rifle with two diffrent sizes of selector levers. I like them both to be the same size and I prefer the longer levers. Solution: I ordered a set and mounted the long lever. Then I had a factory lever and an aftermarket lever. So I ordered a second set and installed the long lever on the other side. In hind sight I should have ordered a second long lever from FN. Oh well, what can I say. Either way I like the levers. The fit and finish is excellent.
EXCELLENT addition, minor fitting needed(02-11-2012)
THese switches are an excellent addition to your SCAR. A primary issue of concern with the SCAR is the difficulty in employing the stock switches with one hand, especially with regard to Real-World use, and dynamic relaod drills. The stock switches ar fairoly stiff, and VERY difficult to properly enage with one hand (i.e. the FIRING Hand.) These simple levers GREATLY Assist with this problem. Their grip ridges, as well as their greater length, offer better tactile input, as well as SIGNIFICANTLY greater leverage and ease of fire control employment by their user. I would say that they alleviate 85-90% of the stock issue. Additionaly, they look and feel great.
Cons: in order to properly fit them, I had to drill the stock screw hole all the way through. THis offered me better fitment and snag free employment. This was a relatively minor issue, and was strictly based on personal preference. IN order to accomplish this, simply take a small drill bit, and run it through the exiting screw hole until it comes out the other side.
Overall: a SIMPLE, EASY, CHEAP upgrade. WELL WORTH IT
Pomoc i kontakt
(0) 
Newsletter
Widok klasyczny
Widok mobilny