The Wilson chamber type bullet seater is a favorite among benchrest shooters. A chamber type bullet seater positively controls both bullet and cartridge case alignment. The case and bullet are completely captured by the die prior to the bullet being pushed straight into the case by a close-fitting seating stem. This style of bullet seater works more accurately than a conventional 7/8 inch to 14 bullet seating die. This is one of the most accurate bullet seaters ever made!
Więcej...
Oceny klientów dla L.E. WILSON 6.5MM CREEDMOOR BULLET SEATING DIE
Liczba ocen: 7
Od brownells.com: 7
Średnia ocena: 4,4
Accurate Bullet Seating(25-04-2013)
I use the Lee Seater Dies to accurately seat the bullet into the case. They seem to do a better job than the seating dies that come with most die sets. They do a great job.
Back when, I saw benchrest shooters using them, so I decided to give them a try. They are first rate. However, I did purchase an arbor press to expedite the process. I have no negatives to report.
Awesome!(06-05-2014)
I've used a couple other dies for seating bullets for my 223, but can't get any of them to seat as well as this die does. I am really thinking of switching all my dies to L.E. Wilson.
Problem with 105's(09-03-2011)
When I place a 105gr bullet on a 6BR case it will not go all the way into the die. I went back to another seating die.
Best seater out there!(01-11-2012)
If you case does not fit in the die call L.E. Wilson they will fix to fit your case or round at no charge. Excellent customer service! Wilson has tight tolarances and if your chamber is a bit larger than spec. they will adjust it for you. This seater has been around for over 80 years, does not get any better!
Best Ever(25-12-2012)
I have several sets of Wilson dies and all are perfectly matched to the cases/bullets I use. I've worked with vendors who handle Wilson products as well as working with the company directly. I don't understand the fellow who reported a problem with seating a 6BR 105 grain bullet. I load them all the time and never have had any difficulty with bullets seating or cases fitting. I can report that if a problem as described exists, L.E. Wilson will either identify what you may be doing wrong or fix the problem, if one exists.
Accurate & Easy(09-03-2011)
The easy, accurate way to make 6.5X47 Lapua ammo. Zero or near zero run out, easy to set up and use. Use at home or take to the range with you. No heavy press needed. A small press or mallet will do.
Valuable tool for match loading(28-11-2016)
I shoot a National Match M1A in high power competition. I like this tool because it improves the concentricity of my loaded rounds with little extra effort. Consistency is the heart and soul of accuracy. If I go to the trouble to get things just the way I want them, then I would like to have my efforts be repeatable. This seater takes a variable out of the equation. Good tool.
The Wilson chamber type bullet seater is a favorite among benchrest shooters. A chamber type bullet seater positively controls both bullet and cartridge case alignment. The case and bullet are completely captured by the die prior to the bullet being pushed straight into the case by a close-fitting seating stem. This style of bullet seater works more accurately than a conventional 7/8 inch to 14 bullet seating die. This is one of the most accurate bullet seaters ever made!
Więcej...
Oceny klientów dla L.E. WILSON 6.5MM CREEDMOOR BULLET SEATING DIE
Liczba ocen: 7
Od brownells.com: 7
Średnia ocena: 4,4
Accurate Bullet Seating(25-04-2013)
I use the Lee Seater Dies to accurately seat the bullet into the case. They seem to do a better job than the seating dies that come with most die sets. They do a great job.
Back when, I saw benchrest shooters using them, so I decided to give them a try. They are first rate. However, I did purchase an arbor press to expedite the process. I have no negatives to report.
Awesome!(06-05-2014)
I've used a couple other dies for seating bullets for my 223, but can't get any of them to seat as well as this die does. I am really thinking of switching all my dies to L.E. Wilson.
Problem with 105's(09-03-2011)
When I place a 105gr bullet on a 6BR case it will not go all the way into the die. I went back to another seating die.
Best seater out there!(01-11-2012)
If you case does not fit in the die call L.E. Wilson they will fix to fit your case or round at no charge. Excellent customer service! Wilson has tight tolarances and if your chamber is a bit larger than spec. they will adjust it for you. This seater has been around for over 80 years, does not get any better!
Best Ever(25-12-2012)
I have several sets of Wilson dies and all are perfectly matched to the cases/bullets I use. I've worked with vendors who handle Wilson products as well as working with the company directly. I don't understand the fellow who reported a problem with seating a 6BR 105 grain bullet. I load them all the time and never have had any difficulty with bullets seating or cases fitting. I can report that if a problem as described exists, L.E. Wilson will either identify what you may be doing wrong or fix the problem, if one exists.
Accurate & Easy(09-03-2011)
The easy, accurate way to make 6.5X47 Lapua ammo. Zero or near zero run out, easy to set up and use. Use at home or take to the range with you. No heavy press needed. A small press or mallet will do.
Valuable tool for match loading(28-11-2016)
I shoot a National Match M1A in high power competition. I like this tool because it improves the concentricity of my loaded rounds with little extra effort. Consistency is the heart and soul of accuracy. If I go to the trouble to get things just the way I want them, then I would like to have my efforts be repeatable. This seater takes a variable out of the equation. Good tool.